High Performance AC Ionizing Air Gun (ESD Product)

Product Description

1. Product Description
3E-IAG001 strengthened ionizing dust-eliminating air gun belongs to electrostatic eliminator and can eliminate static and dust. It features light, small volume, flexible operation, convenient maintenance, wide application, etc. Also, it's the ideal device for static-preventing areas of electronic product process. Printing, surface process, plastic machining, etc.

This product is very safe. Operator will not be shocked by electricity, even though he touches the discharge needles for being careless. Also, no fire-striking phenomena occur on the condition that-humidity of air is large and water content in compressed air is high.

3E-IAG001 strengthened ionizing dust-eliminating nozzle need to be equipped with 3E-HVG001 high-voltage generator at the same time to use.

3E-HVG001 and 3E-IAG001 can be connected and used at the same time.

2.Technology parameters
3E-IAG001:
Working voltage: 5.6kV
Working current: d300¼A
Air flux: >300CFM(5kgF/cm)
Compressed air pressure: 3~5kg/cm
Ozone content: 0.03PPM
Operating temperature: 0 degree centigrade~50 degree centigrade
3E-HVG001:

Voltage input: 220V/50Hz or 110V/60Hz
Current input: 0.12A or 0.23A
Voltage output: 5.6KV*2
Current output: Max4.5mA
Woking environment temperature: 0 degree centigrade~50 degree centigrade
The length of power cord: 1.2M
Weight: 3.2kg
Dimensions: D140mm*W100mm*H114mm
Short circuit protection: <3s

3. Installation and Use
3E-IAG001 ionizing air gun should be fixed on a position which is 100-300mm away from protected goods and at this position, the effect is the best.
Ensure the compressed air input must be clean and dry air and the air pressure is 0.3-0.6Mpa.
Connect high-voltage down-lead with 3E-HVG001 and ensure they have good grounding.
Installation should be done by qualified electricians.

4. Warranty Promises
From delivery date on, we offer one year warranty.
If the equipment is used abnormally, no warranty available.
If no authorization, forbid to refit or replace the parts of the ionizing blower.
If service or test is needed, please send this equipment to local supplier.
3E give solemnly promises:
We will provide testing reports.
It is to be noted that all these specifications are subject to change without notice.
3E will supply spare parts for replacement and maintenance in order to ensure that the products can be used normally in maintenance period.