Dual SIM Card (MAI- M)

Product Description

Installation
1. Replace the yellow fake paper card with one of your sim cards(which you seldom use and please pay attention to its direction) refering to diagram I
2. Tear off the blue fake paper card along with double-face glue (please do not make the glue dirty) and then stick the other sim card in the right place refering to diagram II.
3. Put your SIM 1(marked on the FPC) into the sim card holder (not SIM 2 with the steel cover). Details please refer to diagram III.
4. Enclose the battery, put the double-card into the gap between the battery and back cover. And then it is ok. Please refer to diagram IV.
Usage:
1. Enter your phone menu and choose Dual SIM. It shows:
SIM-1
SIM-2
Auto/SW
Setup
2. If you want the card online separately, directly selecting 'SIM-1' or 'SIM-2'. (a '*' will be showed before the selected card).
3. Select Auto/SW ('*' before it), the phone will enter the dual-number waiting state and the cards will be switched automatically.
4. If you want more function, please select 'Setup' menu. The submenu will show as below:
SIM1 No.
SIM2 No.
SW time: 03
Chinese
5. Select and enter 'SIM1 No. ' or 'SIM2 No. ', you could edit SIM1 or SIM2 with the maximum input numbers up to 12. After this, the present number will be displayed on the screen.
6. Enter 'SW time: 03', you could set the auto-switching time. The default setting is 3 minutes. The auto-switching time is from 0 to 99 minutes.
7. 'Chinese' ('English') is switching menu for the two languages.

Accessory and Packing Detail:
Friendly Notice:
1. If you only want to assemble one card, please assemble it in SIM1 position (There is symbol on the PCB. ).
2. If you want to recover the SIM card, just insert the card into the labeled recovering card and stick it tightly as diagram 9.
3. For some types of phones with transverse inserting and hidden card, there are eight protruding labeled stainless steel flakes to avoiding the pulling difficulty. Such types as we know include: MOTO V70; NOKIA 8250, 8210, 3230, 2100, 6260, 6650, 8800; HAIR 3000C, etc. For normal phones, you are kindly suggested to use the labeled stainless steel flake with 12 protruding parts on each side. This kind of flake could make the products touch much more tightly and make the processing steadier. It is just one of our patent items.