Product Description »

WD1610

1. Allow only one-way rotation either Clockwise or counterclockwise, and
The direction is set during fabrication.

2. The rotation interval is 90 degree.

3. Machanical key switch is used to Lock/unclock rotation direction.

4. Electronic control board can connect Any access control device with dry
Contact interface.

5. Power supply: AC220V, 50HZ

6. Operation environment: -15 degree-+65 degree, RH: Less than 95 percent

7. Dimensions are 2185mm high,
1525mm wide and 1270mm deep.

8. Two type material finished:
A. WD1610-P, all steel components Are hot-dipped galvanized and all Surfaces are powder coated to grey White color.
B. WD1610-S, all steel componets are Stainless steel.