Inquiry Basket (
Tools & HardwareA valve actuated by a solenoid, for controlling the flow of gases or liquids in pipes.
A power tool is a tool powered by an electric motor.
A temporary platform, either supported from below or suspended from above, on which workers sit or stand when performing tasks at heights above the ground.
The rod by means of which the disk or plug is moved to open and close a valve.
A hand tool having a toothed blade for cutting boards.
A device, such as a saw, used to perform or facilitate manual or mechanical work.
Machines and other physical equipment directly involved in performing an industrial, technological, or military function.
A device operated by a key, combination, or keycard and used, as on a door, for holding, closing, or securing.
The flat cutting part of a sharpened weapon or tool.
The roller is an agricultural tool used for flattening land or breaking up large clumps of dirt, especially after plowing.
Of or relating to air or other gases.
A cutting instrument consisting of a sharp blade attached to a handle.
Any of various tools, either hand-operated or power-driven, having a thin metal blade or disk with a sharp, usually toothed edge, used for cutting wood, metal, or other hard materials.
The hand-operated or hand-powered holder for this implement.
Tools used in garden.
The blade of a saw.
A hand tool used to exert an impulsive force by striking, consisting of a handle with a perpendicularly attached head made of a relatively heavy, rigid material.
An often portable structure consisting of two long sides crossed by parallel rungs, used to climb up and down.
A hard material made of compacted binary compounds of carbon and heavy metals, used to make tools that cut metal.
The part of a machine tool which comes into contact with and removes material from the workpiece by the use of a cutting medium. Also known as cutter.
A cutting implement consisting of two blades joined by a swivel pin that allows the cutting edges to be opened and closed.
Electric-Pneumatic tool.
Tool, usually operated by hand, for tightening bolts and nuts.
A machine that trims timber.
Hand tools or tool case.
A wheel or disk having an abrasive material such as alumina or silicon carbide bonded to the surface.
A tool used for turning screws.
A variously shaped hand tool having a pair of pivoted jaws, used for holding, bending, or cutting.
Pneumatic Elements
Parts or accessories of equipment.
Instrument activated by air pressure. Pneumatic tools are designed around three basic devices: the air cylinder, the vane motor, and the sprayer.
A wheel, usually toothed, operating with a catch or a pawl so as to rotate in only a single direction.
A detachable lock with a U-shaped bar hinged at one end, designed to be passed through the staple of a hasp or a link in a chain and then snapped shut.
Instruments activated by air pressure.
A wrench having a hook, hole, or pin at the end for meshing with a related device on another object.
A box or chest or cabinet for holding hand tools.
An often portable structure of aluminum alloy material, consisting of two long sides crossed by parallel rungs, used to climb up and down.
Garden hedges, which used to be cut with a knife or with pruning shears, can now be cut with a powered hedge trimmer
A type of fastener, especially for binding several electronic cables or wires together, and to organize cables and wires.
One that scrapes, especially a tool for scraping off paint or other adherent matter such as ice on a windshield.
Extensible or compressible ladder.
A circular saw blade used for cutting hard or abrasive materials.
The tool fittings with physical science and technology of the static and dynamic behavior of fluids.
A grinding wheel in which synthetic diamond dust is bonded as the abrasive to cut very hard materials such as sintered carbide or quartz.
A power saw for cutting wood or metal consisting of a toothed disk rotated at high speed. Also called buzz saw.
A scissors-type tool of relatively large size.
A hollow cylinder of copper used for the conveyance of water, gas, steam, petroleum, etc.
A mechanism designed to rotate and to cause an annular-shaped rock-cutting bit to penetrate rock formations, produce cylindrical cores of the formations penetrated, and lift such cores to the surface, where they may be collected and examined.
A ladder capable of being folded for easy storage or carring.
The injection of gas near the bottom of an oil well to aerate and lighten the column of oil to increase oil production from the well.
A composite spring, used especially in automotive suspensions, consisting of several layers of flexible metallic strips joined to act as a single unit.
A usually portable device for raising heavy objects by means of force applied with a lever, screw, or hydraulic press.
A rotating power drill powered by an electric motor.
A fastener consisting of a threaded pin or rod with a head at one end, designed to be inserted through holes in assembled parts and secured by a mated nut that is tightened by applying torque. And a short metal block having a central hole which is threaded to receive a bolt, screw, or other threaded part.
A screw with a specially hardened thread that makes it possible for the screw to form its own internal thread in sheet metal and soft materials when driven into a hole. Also known as sheet-metal screw; tapping screw.
Gasoline tools, having a thin metal blade or disk with a sharp, usually toothed edge, used for cutting wood, metal, or other hard materials
A small hand tool with a handle and flat metal blade, used for scooping or spreading plaster or similar materials.
A long-handled implement with a row of projecting teeth at its head, used especially to gather leaves or to loosen or smooth earth.
A hand-operated tool designed to cut and remove the insulation for a predetermined distance from the end of an insulated wire, without damaging the solid or stranded wire inside.
A shady resting place in a garden or park, often made of rustic work or latticework on which plants, such as climbing shrubs or vines, are grown.
A portable powered tool used for scooping or spreading plaster or similar materials.
A portable power saw with teeth linked in an endless chain.
A fixed-blade device for continuous longwall mining of narrow seams of friable coal; the machine is operated along the coal face, planing a narrow cut from the solid coal as it travels.
A gas spring is a type of spring that, unlike a typical metal spring, uses a compressed gas, contained in a cylinder and variably compressed by a piston, to exert a force.
A short, sharp-pointed nail, usually with a flat, broad head.
An aluminum compound found in many polishing agents.
A wheel or disk having an abrasive material such as alumina or silicon carbide bonded to the surface.
Metal goods and utensils used in construction or building area.
A spraying machine powered by electricity.
A common tool used in various trades and crafts for a variety of purposes.
An angle grinder is a handheld tool powered by an electric motor, petrol engine or compressed air.
An often portable structure made of steel alloy, consisting of two long sides crossed by parallel rungs, used to climb up and down.
Any of three types of fast-cutting, compressed-air rock drills (drifter, sinker, and stoper) in which a hammer strikes rapid blows on a loosely held piston, and the bit remains against the rock in the bottom of the hole, rebounding slightly at each blow, but does not reciprocate.
An impact wrench is a socket wrench power tool designed to deliver high torque output with minimal exertion by the user, by storing energy in a rotating mass, then delivering it suddenly to the output shaft.
A tensioner is a large industrial spring. A tensioner is used between two objects that should be kept together and make relative, more or less unpredicted, motions towards each other.
A cylindrical rod incised with one or more helical or advancing spiral threads, as a lead screw or worm screw.
An elastic material that reacts against torsion (twisting motion).
A metal tool with a sharp beveled edge, used to cut and shape stone, wood, or metal.
A hand tool consisting of a handle with a head of metal or other heavy rigid material that is attached at a right angle, used for striking or pounding.
Construction Equipment &Tools
A drill having deep helical grooves along the shank from the point.
A tape of cloth, paper, or steel marked off in a linear scale, as of inches or centimeters, for taking measurements.
A grinding wheel in which synthetic diamond dust is bonded as the abrasive to cut very hard materials such as sintered carbide or quartz.
A wire brush which is sufficient to remove the oxide and leave a clean surface.
Implements with cutting edges or a pointed end for boring holes in hard materials, usually by a rotating abrasion or repeated blows; a bit.
A ribbon of cloth, plastic, or metal with linear-measure markings, often in both imperial and metric units.
One who, or that which, polishes; also, that which is used in polishing.
A device consisting of bristles fastened into a handle, used in painting.
A grinding wheel in which synthetic diamond dust is bonded as the abrasive to cut very hard materials such as sintered carbide or quartz.
Related Trade Shows The 103rd China Import and Export FairVenue:
Pazhou Complex (East Xingang Road, Haizhu, Guangzhou, China) / Liuhua Complex (No. 117 Liuhua Road, Guangzhou, China)
Duration£ºApr 15-30, 2008
Introduction: Date:
Phase I: April 15th - 20th, 2008
Phase II: April 25th - 30th, 2008
Venue:
China Import and Export Fair (Pazho ...
 The 101st China Import and Export Fair (Canton Fair)Venue:
Chinese Export Commodities Fair (Pazhou) Complex (East Xingang Road, Haizhu, Guangzhou, China) / Chinese Export Commodities Fair (Liuhua) Complex (No. 117 Liuhua Road, Guangzhou, China)
Duration£ºApr 15-30, 2007
Introduction: Date:
Phase I: April 15th -20th, 2007
Phase II: April 25th -30th, 2007
Venue:
China Import and Export Fair (Pazhou ...
 The 15th China Kunming Import & Export Commodities FairVenue:
Kunming International Convention & Exhibition Center
Duration£ºJune 06-10, 2007
Introduction: Approved by the Ministry of Commerce of P.R.China, China Kunming Import & Export Commodities Fair (short for Kunming Fair) ...
 The 6th Qingdao lnternational Metal Working lndustry ExhibitionVenue:
Qingdao international Convention Center
Duration£ºMar 18-20, 2008
Introduction: Special Invitees
Haire group
Hisense group
QT-Group
AUCMA Group
Qingdao Beihai Shipyard
Exhibition Introduction
Q ...
2nd Global Foundry Sourcing Conference 2008Venue:
7F, Shanghai Mart, Shanghai, China
Duration£ºMar 21-22, 2008
Introduction: Main Activities
The Foundry Sourcing Conference
The Multinational Casting Purchasing Presentations
The Foundry Suppli ...
|