Nano Power Fuel Saver Device-Diesel/Gasoline (TC-DE-01)

Product Description

Sofun Nano Power Economizer King Manual (Diesel).
The Nano Power Economizer King Fuel Saver has been created through the use of patented nanotechnology. It consists of a proprietary combination of composite materials. When properly bonded together and subjected to specific levels of optical and heat energy from various sources this composite material creates a passive energy field.

This energy field produces a low frequency resonance which energizes and miniaturizes hydrocarbon fuel molecules as they pass through the field. The end result is complete combustion which results in fuel savings and increased engine performance. In achieving complete combustion emissions are reduced. The Nano Power Economizer King works on both gasoline and diesel fuels. The lifespan of the Fuel Saver is three (3) to five (5) years.

When properly installed the Nano Power Economizer King can provide users with the following:

1) Increased combustion rate and lower emissions.
2) Improved engine efficiency and better gas mileage.
3) Fuel savings on average: 10~15%, City & 15~25%, Highway.
4) Non-utilized gas waste is decreased by an average of more than 15%.
5) Non-methane hydrocarbon (NMHC) emissions are decreased by more than 20%.
6) Extended engine life.

The results for each vehicle will vary based on existing engine conditions when the fuel saver was installed and driving habits of the vehicle operator. A brand new vehicle will obviously not have the carbon build-up that an older model will have and thus break-in times will vary.

Basic Considerations:
Professional installation is recommended to ensure that placement is correct. The Nano Power Economizer King is not intended for use over metal fuel lines. If metal fuel lines exist, a rubber or plastic fuel line must replace a portion of the metal line in order to properly install the fuel saver.

Fuel Saver Taboos:
Avoid direct contact with water and direct sunlight as these degrade the composite materials used to create the fuel saver. Do not install more than two fuel savers on the fuel inlet hose. Do not inter-mix diesel and gasoline models of fuel savers. After initial installation do not uninstall and reinstall frequently.