CHOPPED STRAND MAT

INTRODUCTION: E-glass chopped strand mat is made from fiberglass strands chopped to length and bonded together with powder or emulsion binder. Chopped strand mat is used primarily for hand lay-up processes, filament winding and press molding of FRP products. Typical products include bathroom accessories, pipe, building materials, automobiles, furniture and other FRP products.

PRODUCT CHARACTERISTICS:
1. Low Fuzz, dirt, impurity and other stains.
2. Fast Wet-out.
3. Even thickness,
4. Good covering and degassing properties.
5. High mechanical strength and high wet strength retention.

TECHNICAL SPECIFICATIONS:
R2O Content <0.8%
Compatible Resin Polyester
Fiber Diameter 13um
Moisture Content < 0.3%
LOI 2~8%
Binder type Powdered or Emulsion polyester
Styrene Solubility  < 50 seconds
Speed of wet-out < 60seconds

POLYESTER LAMINATE STRENGTH PROPERTIES:
Tensile Strength 126Mpa  
Tensile Modulus 10.4Gpa
Elongation 1.6%  
Bending Strength 284Mpa
Bending Modulus 11.9Gpa  
Resin content 59.5%
**Reference data only - not for technical specifications.

PACKAGING:
Chopped stand mat products are rolled around a mandrel with an inside diameter of 10.5cm. Each roll has an ousted diameter of 30cm. The rolled products are wrapped with plastic bags and put in carton, one 20`FCL can load about 8-10.08mts goods.