Mini 4" High-Speed Dome Camera (PE3035Series)

Product Description

Functions
It can set address & protocol in speed dome OSD menu.
Powerful original module inside.
Remote update flash of speed dome by RS485 bus.
Automatically identify PEAMRAIN protocol or PELCO D/P protocol.
Powerful OSD menu for setup of Programmable Functions
With function of auto focus, auto iris, auto white balance and auto backlight comensation etc. To have clear camera scene at any time.
Built-in linear power for anti-surge and anti-Lightning protection
Alarm (4CH inputs & 2 repay out, optional function)
Preset postion storage function, it can save maximum 256 preset.
8 cruise tours, every tour can call 32 preset.
4 Pattern tours, to save the scan route by joystick.
1 automatic scan, the scope of two limits can be scanned gradually, the scanning steps are optional.
Automatic recover to movement before power failure.
Time start-up function, to start movement in time table have been set.
Power-up action, preset, cruise tour, pattern tour, auto scan, etc. Available for it.

Park action, preset, cruise tour, pattern tour, auto scan, etc. Available
360° Continous panning.
-5° ~90° Tilting rotation, automatic flip function, continuous tilting between -5° To 185° .
Privacy masking function, Up to 24 Zones, 8 Zones Masked Simultaneously in One Camera Image.
Limit setting, to set the pan or tilt movement in a scope.
On-Screen display: Compass, Pan, Tilt, Zoom ratio and temperature

SPECIFICATIONS
Specifications for Pan-tilt:
Address: 0~255
Pan range: 360° Continue
Tilt range: 0° ~90° Flip
Manual speed Pan: 0.05~240° /Sec
Manual speed Tilt: 0.05~180° /Sec
Preset speed: 240° /Sec
Preset accuracy  ± 0.50°
Preset: 256

Remote firmware updating and setup: To update firmware by RS485, to set ID by RS485
Cruise Tours: 8 Programmable(Dwell time speed preset point)
Speed setup for cruise tour: Yes
Pattern Tours: 4 Programmable
Auto Scan 1 Programmable: (355° Scan )
Alarm: Optional, 8 inputs, 2 outputs
Temperature setup and display: Temperature alarm & display on screen
Time adjustment: To adjust Time by broadcasting
Date/Time setup and display: Date/time display on screen and modify
Timer Programming: Timer action
Integrate multi-protocol: Pelco_D/P, PEARMAIN, Pelco C (optional)
Protocol Automatic identify: Pelco_D/P, PEARMAIN
Total working time recording: To record total working time and time exceed limit

Home position: Yes, preset, cruise tour, pattern tour, auto scan, etc. Available
Password protection: Yes
Long-focus speed-limited: Yes
Broadcasting address: Yes
Intelligent power-off memory current setting and state: Yes
Anti-surge and anti-Lightning protection: Yes
OSD menu operation: Yes
Supporting camera: Automatic identify, (Sony, Hitachi, SANYO, LG, CNB )
Camera menu operation: Yes
Camera character programming: 20 character
Privacy masking: Yes

Ingress Protection IP66: Yes
Operating Temperature: (-)40~70 degrees
Humidity: 0%~90% (Non condensing)
Heater operate: (-5) on +5 degrees off
Power: 24VAC± 25%, 1.5A-- 2A, 60Hz/50Hz
Consumption: Heater off 12W heater on 37W
Communication: RS485 (+/-) or Manchester
Connection: BNC cable