Product Description
Process description:
Charging manually, decoiler unit 1#. 2#, two-roll pinching machine 1#, entrance deflect, electric clipper, stitcher machine, Press machine, tension machine, storing loop
Units, alkaline tank cleaning, spraying alkali liquor scrubbing, spraying alkali liquor
Scrubbing, spraying water cleaning, spraying neutral, spraying water cleaning, spray
Activation, spraying water cleaning, wiping alignment machine, drying oven, tension
Machine, primary coating machine, primary coating solidifying furnace, air cooling
Box, correcting denotation machine, correcting denotation machine, tension
Machine, precise coating machine, precise coating solidifying furnace, air cooling
With air-knife, fog and water cooling unit, wiping alignment machine, tension machine, storing loop units, tension machine, electric clipper, inspection platform, exit
Deflect, servo coil unit, discharging manually,

1. Raw material: Aluminum coil
2. Weight of raw material aluminum coil: Max. 8000kg/coil (weight at decoiling)
3. Weight of final aluminum coil: Max. 6000kg/coil (weight at coiling)

4. Inner diameter of aluminum coil: D 508mm or D 610mm
5. Outer diameter of the aluminum coil: Outer diameter at decoiling: 800-1600mm,
Outer diameter at coiling: 800-1600mm
6. Thickness of raw aluminum plate: 0.10-2.5mm (choose thickness within this range
According to customer's requirement)
7. Width of aluminum plate: ¡Ü1800mm (choose width within this range according
To customer's requirement)
8. Line speed: 10-80mm/min (polyester); (choose line speed within this range according to customer's requirement) 15-40mm/min (pvdf); (choose line speed within this range according to customer's requirement)
9. Energy: Electric, natural gas, diesel oil, liquefied gas, propane (pressure force:
50-100Mbar) (choose energy type according to the local energy requirement of
Customers')
10. Roller coating process: Coating: Continuous twice coating and drying on top side
Or both sides (laminated film system can be chosen: Dry film laminating)
11. Thickness of color coating: Thickness of dry film on base coating can be 8~10¦Ìm(wet film is about 15~20¦Ìm ). Thickness of dry film on top coating can be 10~20¦Ìm (wet film is 20~40¦Ìm ).
12. Normal Coil coating: Polyester, silicium changed polyester, polyurethane, epoxy,
Alkyd resin, acrylic resin, solution-type acrylic resin, PVC, polyvinylidene. Pvdf, etc.
13. Geology conditions: 0-500 above sea level; Temperature of environment: 0~56oC
Relative moisture: Max. 90%, Min. 15%