Inquiry Basket (
Home » Offer List » Network Communication Device » 10/100M Self-Adapt Media Converter (APT-103WS34/54OC)
Offer Details
10/100M Self-Adapt Media Converter (APT-103WS34/54OC)
| Offer Type: |  |
|---|---|
| Offer Category: | Electrical & Electronics >Telecommunication & Broadcasting > Network Communication Device |
| Offer Post Time: | 2009-12-30 |
| Expiration Date: | 2010-12-30 |
| Details: |
Name: 10/100M self-adapt Media converter
Type: APT-103WS34/54OC Scale: 10/100M WDM media converter APT-103WS34/54OC Single-fiber Dual-direction Fiber Optic Media Converter Single-fiber dual-direction fiber optic media converter be used Ethernet's electric signal to transmit photosignal 's photoelectricity signal transceiver, the feature is adopt one fiber cable can receive and transmit photosignal in-phase, enhance one double transmit energy than existing optical fiber, economized fiber cable's source. APT-103WS34/54OC is a self-adapted single-fiber dual-direction fiber optic media convertr with 10/100M. Due to single-fiber dual-direction media converter's transmit photosignal transmit wavelength and receive wavelength are difference, than must use by gemination. Namely is one TX and one RX, don't be used wrong, otherwise can't work up to snuff. APT-103WS34/54OC singlemode single-fiber's transmit photosignal is wavelength 1550nm, receive photosignal is wavelength 1310nm; Sing-fiber dual-direction media converter have one RJ-45 interface and one SC single-fiber interface, separate for use to connecting twisted-pair and fiber. Single-fiber media converter have 6 LED indicator: POWER, TX100, FX100, FX Link/ACT, TX Link/ACT, FDX. Technical paramter 1. Accord with IEEE802. 3 IEEE802. 3u IEEE802. 3x IEEE802. 1q 100Base-T, 100Base-TX, 100Base-FX standard. 2. Support TCP/IP PPPOE DHCP ICMP NAT protocol 3. Flow control mode: Full duplex adopt IEEE802. 3X, half duplex adopt Backpressure's standard. 4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed. 5. Prot supply Auto-MDI/MDIX automatic reverse. 6. Support storage transmit mode 7. Support electricity port's 10M 100M mode or self-adapt mode's switch. 8. Afford of state indicator, external power(output 5V-50HZ 1A) 9. Interface: Electric port RJ-45 fiber port: SC 10. Twisted-pair: CAT. 5 CAT. 6 11. Singlemode fiber: 8/125, 8. 3/125, 9/125um 12. Working temperature: 0~50degree 13. Storage temperature: -20~70degree 14. Humidity: 5% ~ 90%(noncondensing) 15. Size: 26*70*94mm(H*W*L) Specification Connect type: SC Fiber type: Singlemode Wavelengh: 1310/1550nm Typical distance: 40KM Min TX PWR: -9. 0dBm Max TX PWR: -3. 0dbm Sensitivity: <-32dbm Link budget: 23. 0dbm Note 1. Optical port working mode is 100M Full Duplex, LAN port is Auto Negotiation. 2. Twisted-pair interface initialization base to couple equipment state to set self's state. If can't test opponent state, that state is uncertainty. 3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when the media coneverter is electrify state. 4. Please put dustproof cover on fiber interface, when the fiber optic media converter is not used. 5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optical interface's speed and mode must be consistent (multimode and singlemode). Interconnection equipment's LAN port's speed should mismatch. (100Base-TX/100Base-T) 6. This product must be gemination use. Gemination media converter's optic module's transmit and receive part must use separate 1310nm and 1550nm wavelength. |
