Product Description
Name: 10/100/1000M Self-adapt fiber optic media converter
Type: APT-1124S33OC
Scale: 10/100/1000M optical media converter

APT-1124S33OC Gigabit Self-Adapt fiber optic media converter
Dual-fiber dual-direction fiber optic media converter be used to Ethernet's electricity signal switch to photosignal's transmitter. Its feature is the media converter's RJ-45 interface can auto-identify with couple equipment port speed and pass autoconditioning working frequency to match with couple equipment port, the speed can adjust 10M 100M and 1000M. Due to built-in power independent optical port and working mode, can improve the stability and capability in working.

APT-1124S33OC is a self-adapt gigabit singlemode double-fiber media converter. The transmit photosignal is 1550nm and 1310nm; Have one RJ-45 interface and one SC single-fiber interface, separate used to connecting twisted-pair and fiber. Single fiber media converter have 6 LED indicator:
POWER, SPDFX1000, SPDTX1000, FX Link/Act, TX Link/Act, FDX.

Technical parameter
1. According with IEEE802. 3ab/z, IEEE802. 3u, IEEE802. 3x, IEEE802. 1q, 10Base- T, 100B ASE-TX, 1000BASE-TX, 1000Base-SX, 1000Base-LX standard.
2. Support TCP/IP, PPPOE, DHCP, ICMP, NAT protocol.
3. Flow control: Full-duplex adopt IEEE802. 3X, half-duplex adopt Backpressure standard.
4. Eletricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed.
5. Port support Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode, cache capability is 256K.
7. Support electricity port 1000M mode and self-adapt mode's switch.
8. Afford the state indicator, external power(output 5V~50HZ 1A).
9. Interface: Electric port: RJ-45 fiber port: SC
10. Twisted-pair: Cat. 5 Cat. 6
11. Singlemode fiber: 8/125, 8. 3/125, 9/125um
12. Working temperature: 0 ~ 50degree
13. Storage temperature: -20 ~ 70degree
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 140mm*110mm*30mm(L*W*H)

Specification
Connect type: SC/FC/ST
Fiber type: Singlemode
Wavelength: 1310nm
Typical distance: 20km
Min TX PWR: -6. 0dBm
Max TX PWR: -1. 0dBm
Sensitivity: < -21dBm
Link Budget: 15. 0dBm

Note
1. Optical port working mode is 10/100/1000M Full Duplex, LAN port is Auto Negotiation.
2. Twisted-pair interface initialization basis to check couple equipment's state for set self's state. If can't check out opponent state, that the state is uncertainty.
3. Strictly prohibit use unaided eye to look at the TX fiber transmit port when the media coneverter is electrify state.
4. Please put dustproof cover on fiber interface, when the fiber optic media converter is not used.
5. When the product connecting with other equipment(router, switch, HUB, NIC), the interconnection equipment's optic interface's speed and mode must be consistent(multimode and singlemode). (1000Base-SX/1000SX). Between Interconnection equipment's LAN port's speed should mismatch. (1000Base-TX/100Base-TX/10Base-T).