APT-103S34IC Singlemode Built-in Media Converter
The Converter have been tested and found to comply with the limits for a class A didtal
Device, pursuant to part 15 of the FCC Rules. These standards are designed to provide
Reasonable protection against harmful interference when these devices are
Operated in a commercial environment. These devices can use, generate and radiate radio
Frequency energy and may cause harmful interface to radio communications unless
Installed in accordance with User's Guide. Operation of this device in a residential
Area is likely to cause harmful interface which will make the user responsible for
The appropriate remedial action at this/her own expanse.
These are class A products In a domestic environment these products
May cause radio interface in which cause the user will need to consider adequate preventative menasures.

Technical parameter
1. Standards: IEEE802.3u Fast Ethernet 10/100Base-TX and 100Base-FX
2. Connectors: (RJ45-UTP and Fiber SC)
3. LED: Power. FDX/Col, FX-Link/Act, TXLink/Act, FX100, TX100
4. Data Tranfer Mode: 10/100Mbps
5. Duplex Mode: Full or Half Duplex Mode
6. Power requirement: AC 100-260V DC1A@+5V
7. Ambient temperature: 0~70degree
8. Humidity: 5% - 90%(noncondensing)
9. Cable: Cat. 5 UTP cable
10. Fiber: Singlemode
11. Size: 140mm*110mm*30mm (L*W*H)
Specification
Connector Type: SC
Typical Distance: 40Km
Fiber Type: Singlemode
Wavelength: 1310nm
Min TX PWR: -15.0dBm
Max TX PWR: -7.0dBm
Sensitivity: -32.0dBm
Link Budget: 17.0dBm