Guangzhou Lushan New Material Co., Ltd.
Compatibilizer, Coupling Agent, Aleic Anhydride Grafted manufacturer / supplier in China, offering Maleic Anhydride Grafted Polypropylene, Hot Melt Adhesive, Solar EVA Film (EV1050G1) and so on.
Home Company Profile Product List Contact Details Send Inquiry
Supplier Homepage Product List Adhesive Maleic Anhydride Grafted Polypropylene

Maleic Anhydride Grafted Polypropylene

Min. Order: 5 Tons
Payment Terms: L/C, T/T

Product Detail

Basic Info
  • Application: Coextruded Multi-Layer Barrier Packaging
  • Classification: Hot Melt
Product Description
Maleic anhydride grafted polypropylene (PP-g- mAh) Lushan series is evaluated as compatibilizer which is used to fill or reinforce polypropylene. As the polymer coupling agent, PP-g- mAh can significantly improve the filled or enhanced PP's mechanical properties and heat resistance. At the same time, the introduction of polypropylene molecular chain polar groups could significantly improve PP's shading ability.

Compatibilizer Usage
1, As compatibilizer for polypropylene filled with glass fiber or mineral: Maleic anhydride grafted polypropylene has a high polarity. As long as adding a small amount (4%), it can significantly improve interface bonding strength between PP and the glass fiber, talc, mica and other inorganic fillers. Modified polypropylene's tensile strength, bending strength and impact strength have been improved significantly.
2, As compatibilizer for PA / PP, PA / PE alloy: To improve the processing of nylon, impact resistance, lower water absorption and products dimensional stability.
3, Improve coating and painting/ shading properties for polypropylene.
    Maleic Anhydride Grafted Polypropylene      
Item PR-3 PR-5 PR-2A
Appearance Natural color or light yellow granule Natural color or light yellow granule Natural color or light yellow granule
MI ≥ 80 g/10min ≥ 400 g/10min ≥ 80 g/10min
Grafting Ratio H M H
Substrate HomoPP HomoPP CoPP
  Characteristics High grating ratio with wide application range High fluidity and saturation  High resistance to thermal heating
Grafting Ratio: H≥ 1.0wt%, M≥ 0.5wt%. These are typical properties and not intended as specification.
Guangzhou Lushan New Material Co., Ltd.
Guangdong, China
Local Time: 2017/Feb/28 15:52:51
Account Registered in: 2010
Business Type: Manufacturer/Factory
Find Similar Products By Category