Carbon Monoxide Detector (ATS-71)

Product Description

CE approved.
1. Loud85 decibel alarm;
2. Permanent carbon monoxide(CO) sensor;
3. Powered by 9V battery (AC adaptor is optional)
4. The alarm sound pattern is pulsed three alarm beeps.
5. Working normally: When power is connected by batter, the red light will flash once with in 60s. (when it works with AC power adaptor, the green light will be illuminated.
6. The red LED will flash once every one second while in alarm mode.

7. The yellow lights flashed twice each 40's with two "chirp", when sensor is a short circuit, after 5 minutes; And it indicate sensor fault; When the sensor is a open circuit, after 26minutes; It indicates sensor fault; If the yellow light flashed one time with in 50's, and meanwhile sound on "chirp", and indicates low battery (it need to replace same type new battery)
8. Test button to teat the units electronics and verifies proper unit operation
9. Red LED and green LED lights that indicate normal operation and alarm status.
10. The unit will sound "chip" as power up
11. Green LED: Powered by AC. The green light will be illuminated
12. Red LED: When the detector power by 9v battery, the red light will flash once within 60s
13. Yellow LED: When detector met with fault, and flashing and alarm automatically.

Specification:
1. Power Supply: 9V alkaline battery 6LR61(optional with power adaptor)
2. Sensitivity Setting: EN50291 Standard
CO level(PPM): 50PPM 100PPM 300PPM 400PPM
Responding time: 60~90m 10~40m <3m immediately
3. Standby Current: <50Ua
4. Alarm Current: <60mA
5. Operation Ambient Condition: 0~60 DEGREE, 20~90%R. H.
The CARBON MONOXIDE (CO) alarm monitors the air for the presence of CO. The alarm will sound and be accompanied by the flashing red LED light when there are high levels of CO present.

More Product Features


HS Code:	85301000
Trademark:	ATS
Model NO.:	ATS-71
Standard:	CE, ISO9001, ROHS, FCC,
Productivity:	10, 000 pcs/month
Company:	Shenzhen Autosecu Technology Co., Ltd.