Foshan Awing Doors Manufacturing Co., Ltd.

1. 1, Base on the size of the door-hole, then ,install the upper slippery track of the door,

2. certainly keep it horizontal, install after levelling up if necessary.
3. Install the lower slippery track ,make it below the upper slippery track.
4. Install the door, make wheel in lower slippery track, also regulate its position to make the door perpendicular and push-and-pull flexibly then fix the lower track.

First, the installation of the doorframe

 
1.Take the door lintel( the assemblies of 1# material and 2# material), two mullions( 4# material) and lower track (3#material) put on the ground . Attention: In order to prevent the door from damaging, you had better lay cardboard or carpet on the ground . While installing, all materials need keep positive on the ground.
2.Take half of tapping screw to join the interior structure of the door frame ,attend to keep the interface horizontal.
3.Take six expansile screws into the fixed trough from lower gap on the 4# material separately, and connect with 5# material( install screws : from the top down or from the bottom up).
4.Move 1# material( move left or right), install corner yard. ( fix 12# material from top aperture of 5# with the small screwdriver, and then fix 11# material with two screws)

Second, the installation of the door...

1.Open the pack carefully, take out the lock.
2.Take out the door, in the perpendicular position on the door and door frame, take out the door leaf upwards, put away it.
3.Unclamp the regular screw of the door frame, disconnect the internal and external flame .
4.Put the internal frame in the hole inside, the other is deducted from outsides tightly , then join them with the regular screw.
5.Regulate door hole and keep the door frame upright, calking the interstice if necessary.
6.Drill a hole in the wall through the hole in the board, and make use of the expand screw rivet the door ( prevent the door frame distort) 
7.Install the door leaf.
8.Install the lock, regulate and check it in order to make it suitable.
9.Regulate cover board’s width, and put on it.