Basic Info.
Classification
Parking Sensor System
Product Description
Features
BLIS (Blind Spot Information System) is designed with latest microwave technology to warn driver of other vehicle or motorcycle approaching in the next lane, which is possibly in blind spot from side mirror.
System is activated automatically when vehicle speed is more than 20Km/h, LED indicator turns on if sensor detects another vehicle or motorcycle in the next lane coming closer. If you switch on turn signal at the same side when object is detected, LED indicator will flash, and you will also hear 3 beeps. If you switch on emergency button (both sides turn signals turn on), LED indicator will not flash. When vehicle speed is lower than 20Km/h, system will stop work.
Functions Introduction
1.Blind Spot DetectionDetection rang 3 X 10 meters for vehicle/motorcycle in rear areas,LED indicator turns on if sensor detects another vehicle or motorcycle in the adjacent lane coming closer.
2.Lane Change Assistant If you switch on turn signal at the same side when object is detected, LED indicator will flash, and you will also hear buzzing.
3.Door Open WarningWhen vehicle stopped, system will warn by read triangle turn on at side rear mirror if detected object approaching from left and right rear sides, to warn drivers that if open door right now, it will have the dangerous of collision with rear coming objects.
BSM/SAS Functions
- 24GHz millimeter wave radar sensing technology
- Detection range 3mx10m for vehicle/motorcycle in rear areas.
- Have 3 functions of Blind spot detection, Lane change assist, Door open warning
- Visual warning via LED indicator and buzzer
- LED indicator can be individual built in A pillar or inside mirror
- Audible alarm warning when turn signal is switched on
- With CAN interface, only work above certain speed, e.g., 20Kmh
- Work under adverse weather conditions
-No change on vehicle appearance
- Tailor-made sensor mounting brackets for different cars
- Door-opening Collision warning function optional
BSD System Parameter
BSD System Parameter |
Inspection Item | Technical Requirements |
Operating Frequency | 24GHz |
Working Voltage | 12-24V |
Working Current | <0.4A |
Alarm Volume | ≥65db(60cm of Speaker) |
Alarm Range | Left/Right rear adjacent lane 3 X 20 Meters |
Working Temperature | -40~+85ºC |
Aging Test | Continuous working 48 Hours : Normal |
Installation
1. Sensors
Install sensors at two rear corners of car behind plastic bumper, keep arrow mark "→" on top cover pointed outside and horizontal (parallel to the ground), and form 50 degree angle to car body (front and back direction). The front cover of sensor should be vertical to the ground. See following steps.
I. Find a suitable location for sensor stand, keep two sensor-fixing screw holes in stand up and down, adjusting stand angle, make sure flat panel is vertical to the ground, and form 50 degree angle to car body (front and back direction).
II. Put AB glue on stand base around 3M sticker, then peal off 3M sticker cover, put stand base on selected location. Also put AB glue into stand rotation parts to stop rotation.
III. After stand is fixed tightly (about 8 min), screw sensor onto stand with arrow mark "→" on top cover pointed outside, and arrow mark "↑↑" on side of sensor upright.
Note: Make sure no metal object in front of sensor, and any metal parts around sensor such as cable, lamp housing, etc., should not be movable. Fix those movable parts around sensor to avoid moving during vibration.
2.Control Box
Put control box in a convenient location in driver's compartment.
3.LED Indicators
Stick LED indicators inside close to side mirrors, on a place where driver can see easily.
4.Buzzer
Hide buzzer inside where it is hearable.
5.Cables
(1)Red power cable to ACC+, Black cable to Ground, Yellow cable to left turn+,
White cable to right turn+.
(2)Connect cables to control box, matching colors and pin numbers
Testing
a. Stationary state, Opening ACC, or turn on vehicle.
b. After 3 seconds, walk towards vehicle around 6 to 8m from back and side, LED indicator will turn on, the installation is correct, otherwise, it is wrong.
c. After stationary testing, the side indictor will be lighted up if have vehicles around 6 to 8m, when you open turn signal light at this time, indicator will be lighted up and buzzer will be warning.
Parts
a. Control box: 1pc
b. Microwave camera: 2pcs
c. Special rearview mirror & indicator: 2 sets
d. Special stand: 2pcs
e. Buzzer: 1pc
f. Cables for camera & indicator: 1pc
g. Power: 1pc
i. Instruction manual: 1pc
Screw, bolt, stand, nylon line ect….
Address:
Shu Huichao Industrial Zone, Xixiang, Bao′an District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Consumer Electronics, Electrical & Electronics
Company Introduction:
AYTUNE INDUSTRIAL Co., Ltd., which R&D, manufacture and marketing BLIS/BSD (Blind Spot Detection Information System) products, code reader, VAG scanner, car driving recorder, and auto electronics product. etc.
We has been focused on the filed of automotive safety, with well-equipped testing equipment and strong technical capabilities.
We can provide OEM services. We always believe in our principle of "reputation first, service foremost", seeking to establish long-term business relationships with our partners.