Large Capacity Mining Used Vibratory Feeder (ZG-0590)

ZG Series Vibratory feeder

Vibratory feeder is generally installed in fronted of the primary crusher, conveys big blocks continuously and evenly while removing the dirt and impurities by screen bars. As a necessary equipment, it can effectively control the feeding capacity to match with the capacity of the whole crushing plant

It equipped with two vibration motors as vibration source, in the past to work under. Used in the massive, granular or powder materials form a storage silo evenly sent by the feed device.

Working principle and structure
ZG Series Vibrating Feeder is the use of a new motor, so that the direction of the sieve along the trough for periodic linear reciprocating motion to achieve uniform dosing. ZG Series Vibrating Feeder from the material body, vibrating motor, damping device component.

Installation and commissioning, use and maintenance:

A, Feeder, such as for the batching, dosing, in order to ensure uniformity and stability to the material, to prevent the material level of gravity should be installed, such as continuous feed for general materials, can be installed under the 10 degree tilt. For more viscous materials and moisture content of materials can be installed under the 15 degree tilt.
B, Can be installed under the 15 degree tilt.
C, Feeder after installation should be left 20mm of travel clearance, horizontal should the level of suspension with flexible connections.
D, Air test before all the bolts should be tightened first, especially vibration motor bolt, 3-5 hours of continuous operation, should be re-tightened once.
E, Test, the two vibrating motor to reverse rotation.
F, Feeder during operation should always check the amplitude, the stability of current and noise, abnormal should be to stop treatment.
G, Motor bearings every 2 months, filling a lubricant, a lubricant filling a month hot season.