Inquiry Basket (
Our main products include
Tester,
and so on.
Product List (Total 19 Products)
1. Full Notch Creep Tester
FNCT is a method of determining the stress cracking resistance of polyethylene materials in any ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]2. IZOD and Charpy Impactor
The Resile Impactor is an instrument used to conduct impact tests on thermoplastic materials, in order to ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]3. Melt Flow Indexer (XNR-400/400B/400C)
This type of Melt Flow Indexer is a new and affordable tabletop instrument that tests the melt mass-flow ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]4. Mechanical Stability Tester
This kind of tester can be used to test the mechanical stability of natural rubber latex concentrate, also ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]5. Apparent Density Tester
It is mainly used to test the apparent density of the plastic incompact materials out of the stated funnel. ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]6. HDT/Vicat Tester
This testing machine-with 3 test station-determine the Heat Deflection Temperature or the Vicat Softening ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]7. Tensiometer
It is used to determine the surface tension of polymer dispersions and and rubber latices (natural and ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]8. Hot and Cold Water Recycling Tester (XGH-63)
Pressure cycle composite pipe and fittings under hot and cold test conditions for 5000 cycles using this ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]9. Falling Weight Impact Tester For Profiles
It is used in testing the impact toughness of plastic profile, and also has the function of preventing the ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]10. Pressure Tester (Water Hammer Test) (XGC-2)
Nowadays regulations worldwide require procedures involving dynamic internal pressure load when testing ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]11. Falling Weight Impact Tester for Plastic Pipes
Test pieces are subjected to blows from a falling striker, of specified mass and shape, dropped from a ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]12. Specimen Notch (XQZ)
This type of specimen notch cutter is a manual tester used for making notch of IZOD or Charpy specimens.It ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]13. Ring Stiffness Tester
It is applied in measuring the ring stiffness, ring softness, creep rate and tensile test for pipes, ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]14. Tilt And Turn Hardware Tester
1. General introduction
This type of equipment is used for testing the performance of Tilt&Turn Hardware ...
[Last Updated: 2009-11-03]
This type of equipment is used for testing the performance of Tilt&Turn Hardware ...
[Last Updated: 2009-11-03]15. Environmental Stress-Cracking Tester (XGY-100)
1.Specifications
It is used to determine of the susceptibility of ethylene plastics, as defined in ...
[Last Updated: 2009-11-03]
It is used to determine of the susceptibility of ethylene plastics, as defined in ...
[Last Updated: 2009-11-03]16. Universal Testing Machine / UTM
XLD series Electrical Tensile Tester is used to test the tensile, compress, Flexural and other mechanical ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]17. Hydrostatic Pressure Tester (XGJ-10A)
It is mainly used to determine of the resistance of thermoplastics pipes to constant internal water ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]18. TMA Thermomechanical Analyzer
XRW-500 TMA is a high-performance research-grade thermomechanical analyzer which is used to test the Tg and ...
[Last Updated: 2009-11-03]
[Last Updated: 2009-11-03]
