CPU Equalizer Electronic Coin Selector (CL-530)

Product Description

Coin Selector Name: CPU Equalizer Electronic Coin Selector(Front inserting typy--Allay Face
Ierm No.: CL-530
Unit Price: 80 RMB
Size: W15*D8*H15cm; (within inner packer)

Features:
1. Select coin based on Diameter, Thickness & Metal content;
2. Switch of Normal Open&Normal Close for Signal Output of coin validation;
3.3 ways adjustable Triggering Pulse Duration of Timer Switch;
4. VR tuning&Sensitivity Switch of coin acceptance for eliminating slugs&improper coins;
5. CL-530 equip inhibit input line benefits Vendings&prize games;
6. ClL-530 allows to connect Counter Meter.

Specification:
Coin diameer: 15mm-33mm
Coin thickness: 1.2-3.0mm
Work Voltage: DC12V (± 20%)
Temperature: -15ºC ~ +75ºC

Function:
CPU coin Rolling Down Speed&Timing Presetting by Directional Accept Sensors; Invalidate Against Unusual Stay-Reverse Draw-String Skip-Technical Fishing.

Installation:
1. Replace yellow plastic token to the coin of you wish to be accepted into sampling clamp;
2. Adjust entry slot openning to your coin size by loosening screw on the back of metal panel for blocking bigger invalid coin from inserting;
3. Select the right mode between Normal Open& Normal Close;
4. Select the right speed of coin acceptance among 100ms(slow speed/Long pulse) &50ms (Medium speed/Medium puise &30ms (Fast speed/Short pulse) by TIMER SWITCH for synchronizing with your software;
5. Vr tuning for tolerance of coin acceptance, turn clock-wise for slack & anti-clockwise for precise acceptance;
6. Shift Sensitivity Switch of Coin acceptance donward to "Special" to extend the range of dis criminated ratio for twin metal coins or the coins in big tolerance.

CL-530Guide of Connector
Gary-Counter(±)
Red-Power DC+12V
White-Signal Output of Coin Validation 9999
Black-GND(Ground)
Green-Inhibit input(≤+1V)
Gray-Counter(±)
Connect Green Line of inhibit Input to Host(for low level voltage below≤+1V only) that enable to stop coin acceptance on the demand of Host machine.