Inquiry Basket (
Spiral Wound Gasket (LJ-200)
 Spiral Wound Gasket (LJ-200) |
Product Description
Spiral wound gasket
1. Structure
The wound style gasket consists of "V-shape"(or"W-shape")metal tape and nonmetal tape, which are overlapped each other and wound continuously. To fasten the metal tape, both its start point and end point are tack welded.
2. Performance and Features
1. Wide range of applicable working condition, high temperature and high pressure resistance, applicable to super low temperature and vacuum condition. Chemical resistant gasket is available under various medium, through change of composition of gasket.
2. Strong stress compensation, stable and reliable sealing performance even under frequent pressure fluctuation condition.
3. Perfect sealing performance.
4. Normal requirement of flange surface finishing which contact with gasket.
5. Easy installation and low pre-tightening stress of gasket.
3. Kinds of Gasket
1. A. Wound style gasket consists of four type: Basic type, with inner ring, with outer ring, and with inner and outer rings. B. Heat exchanger wound style gasket: Basic type and with inner and outer rings.
2. Normally matrial used:
A. Steel tape: 08F, 0Cr18Ni9(304), 0Cr18Ni9Ti, 1Cr18Ni9Ti(321), 0Cr17Ni12, M02(316), 00Cr17Ni14M02(316L).
B. (Cold roll)steel plate for inner and outer ring: Outer ring: Mild steel, 0Cr13 and 0Cr18Ni9
Inner ring: Same as steel tape, special order is a available through negotiation.
C. Nonmetal tape: Flexible graphite, special made asbestos, teflon and non-asbestos paper.
4. Scope of Application
1. Working temperature: -190 degree -700 degree(not higher than 600 degree in oxidic medium)
2. Working pressure: ≤ 25MPa
3. Gasket coefficient: M=2.5-4
4. Min. Pre-tightening specific pressure: Y-68MPa
5. Max. Machinable size: -2800mm
| Model NO.: | LJ-200 |
|---|---|
| Material: | Steel |
| Type: | Flat Gasket |
| Export Markets: | North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe |
| Company: | Cixi Liji Sealing Products Co., Ltd. |
Most Popular
-
Flat Washer
Name: Flat washer Material: Steel, stainless ... -
Seal Springs - 3
Supply Ability: 1, 000, 000pcs/month Detailed ... -
Stainless Steel Flat Washer (DIN125)
Description:Flat washer Material:Stainless ...
-
Flat Washer
Washer: Stainless steel washer, high strength ... -
Stamping Metal Auto Parts With Washers and Nuts
Stamping Metal Auto Parts with Washers And Nuts, ... -
Square Taper Washers (DIN435)
Welcome to scan the square washers--DIN434, 435, ...
-
Snap Ring
Snap ring, 1. It is non standard parts, produce ... -
Washers
Various flat washers, DIN 125/126, DIN 9021, DIN ... -
Anti Vibration Mounts
Rubber absorber/Anti Vibration Mounts ...
-
Stainless Steel Plain Washers (CH-Washer-040)
Stainless Steel Plain Washers 1). Material: ... -
Cap Washers
The cap washers are used for wide area. For ... -
Spring Washers (DIN7980, DIN 127A&B)
Welcome to scan our spring washers. This is one ...
-
Wire Nail
Common wire nails Material: 195 mild steel ... -
Hexagon Bolt (001)
Stainless Steel Hexagon Bolt 1) Bolt ... -
Flanges
Our production contains high, middle and low ...
Quick Products |
