MIG Welder (MIG-220)

Product Description

General knowledge for MIG Welder
Compared with the traditional ARC Welder, MIG Welder has the following advantages:
1. Welding efficiency is higher than 30% - 80%.
2. Better welding effect.
3. Low Energy consumption.
4. Low welding cost.
5. Widely Welding range, the welding thickness range is 0.5-70mm or above. It can be welded from many kinds of angle not only single side welding but also down welding, vertical welding, cross welding, and face upward welding. Therefore it is particularly suitable for automotive repair.
6. Welding worker training time may reduce 30% -50%.
7. Reduce the smoke and dust caused by welding.
Special MIG welding knowledge for auto maintenance.
Steel car body
1. The car body should be used Φ0.6-Φ0.8 mm weld wire, crossbeam or other thick part should be used Φ0.8-Φ1.2 mm iron wire.
2. Let the Earth clamp connect the welding point as close as possible to get a good circuit.
3. To ensure the welding quality, we must remove the oil and paint which on the welding surface completely.
4. When welding car body, it is the best to choose the 80% Ar2 +20% CO2 mixture gas because of its thickness. At this situation, the spatter is minimum, the welding surface is smooth, and the strength of the weld is the highest.

MIG-220 is suitable for metal welding in such industries as shipbuilding, furniture making, construction, Vehicle manufacture and maintenance.

(1)With special function for the sheet spot welding (not for long seam welder) regulating the spot welding Time and space time can relieve the fatigue of operator hand and wrist
(2)Be equipped with PWM system and two gear wheels wire feeder, high power and smooth feeding for Welding wire
(3)Transformer: Is made by two or three vertical winding coils, good heat dissipation and powerful
(4)Adopt world famous brand OMRON, Panasonic relay
(5)Intergrated circuit, function module
(6)Excellent seam reshaping
(7)Deep weld penetration
(8)Enhanced productivity
(9)Minimal fusing splash
(10)Binzel welding gun
(11)Stable arc starting
(12)Tapped circuit

Product Specification:
Input Voltage(50/60Hz): 220V 1 pH
Max Power(KVA): 7.2
Output Voltage: 32V
Duty Cycle(%): 45

Product package:
Net Weights: 68KG
Gross Weights: 73KG
Dimension(MM): 43*67*94.5
Quantity for 20'GP: 166PCS
Quantity for 40'GP: 373PCS
Quantity for 40'HQ: 433PCS

More Product Features