8inch Stainless Steel Submersible Pump

Product Description

Take AT200QH80-136/8 as an example

AT: Brand name
200: Minimum well inner diameter that can apply to (mm)
Q: Submersible
H: Seawater
80: Flow capacity (m3/h);
136: Head (m); 8: Impellers.
Application:
AT200QH series submersible pump for seawater is suitable for offshore platform fire-fighting, thermal dissipation, seawater desalinization, seawater lifting, coastal square fountain, mariculture and attemperation as ground source heat pump in coastal area.

Technical parameters:

Max. Outer diameter: 184mm; Outlet diameter: DN100
Outlet connection type: 8 threaded studs M12× 55. Center diatance: 150mm;
Aperture: 11mm
In order to install easily, we particularly have equipped with a matching flange (outer diameter 178mm, inter diameter 2", 3" and 4", thickness: 16mm) consistent to the outlet.

Medium Range:

1 All kinds of seawater, alkaline corrosive water, clean water, cold water, rainwater, gushing water of mining, drinking water, etc.
2 Water temperature range: +5--+25
3 Solid content (mass ratio): ≤ 0.01%
4 pH: 7.9-8.6
5 Full set should be submerged in water.

Motor Parameter:

The submersible motor is lubricated by clean water. It must be filled with clean water or its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power Source:
Voltage: 380v; Frequency: 50Hz or voltage: 660v, frequency: 50Hz
If you need special voltage or frequency, please inform us in advance.
Materials:
Impeller: Common materials plus casting ceramic materials
Pump bowl: Common materials plus casting ceramic materials
Pump shaft: Stainless steel 316L. Filter: 316L. Bolt: 316 Flange: 316
End bell (upper and lower): 316 Middle part: 316 Motor shaft: 316
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: Rubber
Advantages:
1 Easy installation
2 Low noise, multistage
3 Built-in check valve avoiding water hammer impact.

4 High head with single stage, strong stability, the shaft diameter φ 28mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we attach with imported hard bearing liner.

Supplys:

AT200QH series submersible pump for seawater (including the body and motor), built-in check valve, 1 flange matching outlet, 8 threaded studs M12× 55, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.
Friendly reminder:

For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
A.  All kinds of lifting pipes including high-frequency welded pipes (dia. 25mm-500mm); Connection type: Flange connection, screw connection and clamp connection. They are made accurately by machine tools.
B.  Pipe clamp: The length is 50mm-500mm (we can produce the other different spans according to your requirements).
C.  Wellhead devices: Return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; The cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers. )
D.  Desander: Avoiding blocking and polluting by sand in water. And it contributes to long service life.
E.  Related products: Submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
F.  According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.

More Product Features