Camera Modules (MN-150C)

1.3 Mega, 2.0 Mega, 3.0 Megaor or 5.0 Mega Pixels Available

1/2" CMOS Sensor, USB 2.0 High Speed Port

Widely Used in Electronic Industry, Teaching and Agriculture Area for Electronic Amplifying, Electronic Surveying

1.3 Mega Pixels Module Specifications

Array Element: 1280x1024(SXGA)

640x480(VGA)

Pixel Size: 5.2¦Ìmx5.2¦Ìm

Image Area: 6.66mmx5.32mm

Sensing Area: 1/2"

Output: 10-bit digital RGB Raw Data(Original Data)

Max. Frame rate: 15 fps for SXGA

30fps for VGA

Electronics Exposure: 1050: 1 for SXGA

500: 1 for VGA

Scan Mode: Progressive

Gamma Correction: N/A

Sensitivity: 1V/Lux-sec

S/N Ratio: 54dB

Dark Current: 28mV/s

Dynamic Range: 69dB

Power Supply: 3.3(Analog) and 2.5(Core) +/- 5%

Power Requirements: <100mA Active

<60mA Standby

Package 48 pin LCC

USB Signaling Speed

FX2 operates at two of the three rates defined in the Universal Serial Bus Specification

Revision 2.0, date

Full speed, with a signaling bit rate of 12 Mbps

High speed, with a signaling bit rate of 480 Mbps

FX2 does not support the low-speed signaling mode of 1.5 Mbps.

2.0 Mega Pixels Module Specifications

Array Element: 1600x1200(UXGA)

800x600(SVGA)

Pixel Size: 4.2¦Ìmx4.2¦Ìm

Image Area: 6.72mmx5.04mm

Lens Size: 1/2"

Output: 10-bit digital RGB Raw Data (Original Data)

Max. Frame rate: 10 fps for UXGA

40fps for SVGA

Electronics Exposure: 1230: 1 for UXGA

614: 1 for SVGA

Scan Mode: Progressive

Sensitivity: 1V/Lux-sec

S/N Ratio: 54dB

Dark Current: 28mV/s

Dynamic Range: 60dB(due to ADC limitations)

Power Supply: 2.5 VDC +/- 10% (Core) and 3.3 VDC +/- 10%(Analog)

Power Requirements: <100mA (Active)

<50mA (Standby)

USB Signaling Speed

FX2 operates at two of the three rates defined in the Universal Serial Bus Specification

Revision 2.0, date

Full speed, with a signaling bit rate of 12 Mbps

High speed, with a signaling bit rate of 480 Mbps

FX2 does not support the low-speed signaling mode of 1.5 Mbps.

3.0 Mega Pixels Module Specifications

Array Element: 2048x1536(QXGA)

1024x768(XGA)

Pixel Size: 3.18¦Ìmx3.18¦Ìm

Image Area: 6.59mmx4.90mm

Lens Size: 1/2"

Output: 10-bit digital RGB Raw Data (Original Data)

Max. Frame rate: 7.5 fps for QXGA

20 fps for XGA

Electronics Exposure: 1550: 1 for QXGA

780: 1 for XGA

Scan Mode: Progressive

Sensitivity: >1V/Lux-sec

S/N Ratio: 46dB

Dark Current: 0.5 at room temp/30 mV/s

Dynamic Range: 60dB(due to ADC limitations)

Power Supply: 1.8 VDC +/- 5% (Core) and 3.3 VDC +/- 5%(Analog)

Power Requirements: <100mA (Active)

<50mA (Standby)

USB Signaling Speed

FX2 operates at two of the three rates defined in the Universal Serial Bus Specification

Revision 2.0, date

Full speed, with a signaling bit rate of 12 Mbps

High speed, with a signaling bit rate of 480 Mbps

FX2 does not support the low-speed signaling mode of 1.5 Mbps.