|
|
Offer Details
Submersible Dry Motor Pump (QD6-35/3-1.1)
| Offer Type: |
 |
| Offer Category: |
Machinery >Pump & Vacuum Equipment >
Water Pump
|
| Offer Post Time: |
2008-10-07 |
| Expiration Date: |
2009-06-30 |
| Details: |
1. BRIEF INTRODUCTION***
Model QD. Q series of submersible dry motor pump consist of pump, mechanical seals and motor. The pump is on upper part of the motor with multistage or single stage centrifugal impeller and radial guiding vane. The motor below pump is single phase or three-phase asynchronous electric motor. The double-end mechanical seal is used between pump and motor, and the oil-enduring rubber O-ring seals are applied to all static joints
2. APPLICATION***
This series of motor pump adopt multistage impeller and they are widely used for its high head. It is a must of supply and drainage tool for farming irrigation, garden sprinkling and irrigation, well pumping, water tower supply, municipal construction, factories and mining and etc.
3. WORKING CONDITION: ***
It can normally and continuously work under the following conditions:
A. Max. Medium temperature: + 40~C
B. Medium PH value: 6.5-8.5
C. The volume of solid impurity should be no more than 0.1%. The solid impurity diameter should be no more than 0.2mm
D. Power: 50Hz, single-phase AC220V, three-phase AC 380V. The voltage fluctuation should be within 10% of rated voltage.
E. The depth of pump under water should be no more than 5m.
4. PERFORMANCE RANGE***
Fluid temperature up to +40 ~C
Maximum ambient temperature +40 ~C
5. WARRANTY***
ONE YEAR WARRANTY--------> It should according to our general sales conditions.
6. VOLTAGE / FREQUENCY RANGE***
The normal power standard is 220V/50Hz
Single phase: 110V-240V/50Hz, 110V-240V/60Hz
Three phase: 220V-380V/50Hz, 220V-440V/60Hz
Models are available on request |
|
|
|
