ADSL 2/2+ MODEM Router

Product Description

DLM-100BU uses integrated ADSL2+ transceiver and a 256-MHz MIPS32 CPU. The AFE supports full-rate ADSL connectivity conforming to the ITU and ANSI specifications; MIPS32 CPU with MMU and 16-KB I-cache/8-KB D-cache is integrated into the device. In addition to the basic DMT physical layer functions, the ADSL PHY supports dual latency ADSL Framing (fast and interleaved) and the I. 432 ATM Physical Layer. DLM-100BU is a complete plug-and-play solution. With standard Ethernet interface, it can be directly connected to any 10M/100M Ethernet devices, supporting Auto MDI/MDIX.

The DLM-100BU uses ADSL (Asymmetric Digital Subscriber Line) technology for Internet connection speeds of up to 455x faster than dial-up, while using a standard phone line. With a built-in 4-port switch, up to four network-ready computers or devices can simultaneously be connected to the DLM-100BU for access to the Internet.

DLM-100BU not only use HTML (web mode through Ethernet port) to configure the MODEM but also use external utility software, too. With excellent design of circuit and high quality production, we guarantee ADSL MODEM a high performance, very good stability and easy to use.

Software Specification
ADSL Features	Full-rate ANSI T1.413 Issue 2
	ITU-T G.992.1 (G.dmt)
	ITU-T G.992.2 (G.lite)
	ITU-T G.994.1 (G.hs)
	ITU-T G.992.3 (G.dmt.bis)
	ITU-T G.992.5
	Max 6 kilometers
Data Rates	Downstream: Up to 24Mbps
Data Rates	Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features	UNI 3.1 ATM Adaptation Layer Type 5-AAL5
	Multiprotocol encapsulation over ATM (RFC 1483)
	UBR, CBR, VBR-rt, VBR-nrt
	Supports 8PVCs
PPP Features	PPP over ATM (RFC 2364)
PPP Features	PPP over Ethernet (RFC 2516)
Switching Features	IEEE 802.1d transparent learning bridging
Routing Features	Classical IP and ARP over ATM (RFC 1577/2225), MER
	Static routing, IP, TCP, UDP, ARP
	NAT, NAPT, DNS, DDNS, DHCP Server
	UPnP, Virtual Server, DMZ, Port Trigger
Security	NAT
	IP filterling
	MAC filtering
	Parental control
VPN Pass Through	IPSec/PPTP/L2TP Pass-through
QoS	IP Type of service(ToS)
QoS	802.1p
Device Management	HTTP, TELNET, Console
	Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
	SNMP

Hardware Specification
Ports	1 10/100M LAN Port(RJ45)
	1 Line Port(RJ11)
	1 USB 1.1 port
LED Indicators	USB, LAN, ADSL, Alarm, ACT, Power
Dimensions (WDH)	6.54.31.1 in.(16510828 mm)
Environment	Operating Temperature: 0~40 Storage Temperature: -40~70 Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing