F10 is a fingerprint reader specifically for the Access Control .Its remarkable advantage is that it can match with most of the access controllers on the market ,inland or abroad ,It supports Wigand 26-64 output ,and integrates special access control software which can be upload .download, delete and Wigand products ,all input /output are using anti-jamming protection and over-voltage/circuit protection ,The product experiences the strict degradation test before leaving factory ,hihg stability the main feature..

Benefits:

Support Wigand 26 or user-defined format, match most of door access controller
External connected with IC/ID reader. Card+ Fingerprint validation mode for current reader
Adopt Biokey 2005 latest algorithm and intel32 bits processor
Option for built in Mifare reader or EM reader , it can deal with 3000 fingerprint templates , no matter good or poor quality, within only 1 second.
Adopt solid, durable, anti-static optical sensor
user-defined ID No, easy to manage Standard RS485 connection, RS 232 or TCP/IP as auxiliary communication port
Support u are u sensor or F10 for collecting fingerprint template
Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection.
Dismantle alarm TTL output
Convenient DB15 connection
Applicable Wiegand manage software for fingerprint enrollment, download, and upload, deletion

Terms Content
Wiegand input and output
provide a standard wiegand26 or user-defined format to controller,accept the wiegand26 input,that is, a ID card reader could connect toit directly
Capacity of the templates
Standard version 600 templates
The version With in-built ID module 600/5000/8000 templates(three options)
The version with in-build Mifare module Infinite capacity
Verification mode
Standard version
1:1 or 1:N, support only fingerprint
The version with ID card
When 600 templates,
1:1or 1:N,support only fingerprint, card fingerprint, only card

Standard version
When 5000/8000 templates, 1:1, support card+ fingerprint
Communication ways
TCP/IP as backup
Default IP address: 192.168.1.201
RS-485
Default baud rate: 38400,
device number: 1,
port: COM1
Sensor Type:Optical
Resolution 500DPI
indicator, dual-color LED
Identification Speed: Less than 2 Seconds
Technical spec
FAR¡Ü0.0001%,
FFR¡Ü1%
Alarm Dismantle alarm
TTL (transistor-transistor logic) output for alarm
Configuration
Intel32bit processor, 2005 version algorithm
Power
12V DC, currency under idle status<50mA,  
wording currency<400mA
Operation environment Temperature 0-45
Humidity 20%-80%
Management software of fingerprint reader
Size 130*58*62mm