The TC-F06/16 interpreter console is a digitally-controlled workstation allowing two interpreters to work in turn.


FEATURES:

- Handles simultaneous interpretation for 6 or 16 languages
- Gooseneck microphone and headset microphone can be used
- Built-in loudspeaker with volume level control
- LCD screen for specific information display
- 3.5mm jacks on both sides for MIC input and headphone/recording output
- 3 incoming languages can be preset, with pre-select A/B/C keys.
- Automatic channel interlocking prevents interpreters from using same outgoing channel
- Relay interpretation allows the interpreters to work from an active channel other than the floor
- MUTE key to enable a brief muting of the microphone for cough cut
- SLOW key to alert the current speaker to speak slowly
- Loudspeaker is automatically switched off when MIC is on or headset is used
- The floor signal goes to each output channel after the microphone is switched off
- Multiple interpreter consoles can be connected in a daisy-chain
- Designed to comply with all related international standards & requirements.


TECHNICAL SPECIFICATIONS:

- Frequency response: 50-18kHz
- Distortion at 1 kHz: < 0.1%
- Channel separation: > 85 dB
- Signal-to-noise ratio: > 90 dB
- Max. input power level: 7.5V
- Operating voltage: 24V
- Power consumption: 2.5W
- 8 ohms / 2W built-in loudspeaker
- Standard mic stem length: 425 mm
- 128x64 backlit LCD screen
- 3/5/10m cable with DB25 connectors
- 3.5mm jacks for mic, headphone, recorder
- ABS base: 247 X 145 X 95mm



TC-D2
INTERPRETER HEADSET

- Closed-ear stereo headset with microphone
- Connectors: 3.5mm plugs
- Impedance: 60 ohms
- Frequency response: 20-20kHz
- Sensitivity (1kHz): -58 dB
- Microphone type: omni-directional dynamic
- Cord length: 2 meters