CO2 laser is the "gold standard"for laser resurfacing. It's effect has been approved more than 20 years ago. Bese on the theory of"Fractional Photothermolsis", Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, the normal skin been left between the injury point. Allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with high repetition Ultra Pulse Laser systems, enables high-energy treatments while minimizing risks, it is less pain, less down time and good effect.

JZ-2A CO2 Ultra Pulase Fractional Laser system is basd on the JZ-2A Ultra Pulse Laser system, it has one fractional scanner with the scanning area: 1mm*1mm-20mm*20mm, one cutting head with focal length F=100mm. It can been used for the laser resurfacing efficiently with the high speed scanner, also it can been used for the precise laser surgery, like eyebag removal, . Eyelid.

Specifications:
Laser Type: Carbon Dioxide Laser
Wavelengthz: 10.6¦Ìm
Output Power: 30W
Work Mode: CW, Pulse, Ultra Pulse, Fractional
Starting Voltage:  25kV
Operating Voltage: 15kV
Operating Current: 25mA
Focal length of working hea F=100mm
Guiding Beam: Diode Laser532nm, 5mW
Transmission System: 7-Articulation Joint Spring Arm
Smoke Exhausting System: Built-in air blow
Cooling System: Water cooling
Continuos: Power 1~30W step adjustable each 1 W
Pulse: Power 1~30W step adjustable each 1W
Interval time: 1~999ms
Ultra pulse: Power 1~30W step adjustable each 1W
Modulated frequency of 1000 Hz
Pulse Duration: 90-1000¦Ìs
Environmental temperature: 5-40C
Power Supply: AC220V50Hz
Relative Humidity: 80%

Scanner Parameters
Scan Type  Ellipse, Rectangular. (11 type optional)
Scanning Area: 1mm*1mm-20mm*20mm
Repeat Delay: 0.1s---- 5.0s.
Micro Pulse Energy  : 5mJ---50mJ.
Treatment Level: 0.30%-----25.0%.
Estimated Power: 24mJ----981J
Ellipes Estimated Power: 31mJ----1000J
Rectangular estimated power: 24mJ----981J
Spot size  : 350 um
Dwell Time: From 0.2 ms to 2 ms
Dots pitch: 0.2 mm to 1.0 mm.
Handpiece Velocity: 0.1-----9cm2/s
Scanning Depth: <1.8mm

Applications:
Skin resurfacing (to improve texture)
Pigmented lesions: Age spots / brown spots / sun spots
Wrinkles around the eyes
Acne scars
Surgical scars
Melasma (mask of pregnancy)
Actinic Keratoses
Specifications
Working Mode