Fusion Splicer (QH-530)

Product Description

QH-530 Fusion Splicer
Features:
1. Core to core alignment by PAS technology (PAS: Profile Alignment System)
2. Digital fusion splicer with automatic focus function
3. Fiber core can be displayed clearly
4. Single X or Y view and X&Y view simultaneously
5. Auto check cleaved endface fault
6. Display fiber cleaved and offset angle
7. 5.6 inch TFT color LCD monitor with clear digital image display
8. USB & VGA interface
9. Software upgrade via USB interface

Specifications:
Applicable fibers---SM (ITU-T G. 652), MM (ITU-T G. 651), DS (ITU-T G. 653), NZDS (ITU-T G. 655)
Fiber Count---Single
Cladding diameter---80 to150um
Coating diameter---100 to1000um
Fiber cleaved length---8to16mm with coating diameter of 250um or less. 16mm with coating diameter of 250 to 1000um. Optional Set-plate for 8 to 16mm with coating diameter of 250 to 1000um is available
Actual average splice loss---0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS Measured by cut-bak method relevant to ITU-T and IEC standards
Splicing time---Typical 9 sec
Return loss---> 60dB
Splicing mode ---53(templet), 40(user)
Splice loss estimate---Available
Storage of splice result---The last 4000 results to be stored in the internal memory
Fiber view and magnification---300X magnification for single X or Y view; 150X magnification for X and Y view simultaneously, display direction can be changed.
Viewing method and display---Two CMOS cameras and 5.6 inch color LCD monitor
Fiber core can be displayed clearly
Operating condition---0 to 5000m above sea level, 0 to 95%RH and -1050, respectively
Tension test---2N
Electrode life---2500
Tube heating mode---9(templet), 24(user)
Tube heating time---Typical 30 sec
Applicable protection sleeve length---60mm, 40mm and a series of micro sleeves
No. Of splice/heating with battery---Typical 150 cycles (splice/tube heat) with inner Li-battery
Power supply---AC 100-240V with AC adapter; Inner Li-battery(8000mAH)
Terminals---USB 1.1 connector for PC communication, VGA connector for outer display
Wind protection---Max. Wind velocity of 15m/s
Dimensions---150mm(length) x150mm (width) x150mm (height)
Weight---2.7 Kg excluding battery, 3.2 Kg including battery

Packing List:
1. Main Body Machine 1 set
2. P. S. Cord and adaptor 1 set
3. Fiber Cleaver 1 set
4. Electrodes 1 pair
5. Manual Disk 1PC
6. Cooling Tray 1PC
7. Carrying Case 1 PC
8. Total Weight 9.6kgs