H3010 Intermediate Primer (1K)

Product Description

H3010 Intermediate Primer (1K)
Composing:
1K Primer (quick-drying intermediate coating paint) is a mixture of all kind of synthetic resin, pigment, filling, antisetting additives, aids and solvent.

Characteristics:
H3010 1K intermediate primer has good filling capability with primer and poly-putty, quick-drying in the warm room, good grinding and good luster (could reach 5-15%), prevent the top-paint filter inside, have a good adhesive force with top-paint, high hardness and waterproof.

H3010 1K intermediate primer has a good hardness but flexibility, applies principally to the small size car with not finish the top-paint.

Field of Application:
Application for all kind of car, bus and metal etc. as a quick-dry sealing intermediate coating, also be used as a quick-dry single-component repair coating.

Main technical standard:
Item  Technical Index  Testing Standard
Paint Criteria  Outward appearance  No foreign matter and obvious granule, easy to homogenize  Visual measurement
Color & appearance  Gray or iron red thick liquid  Visual measurement
Involatile constituent (120 degree centigrade /1h)  More than 55 % GB/T6751
Coating Film Capability Criteria  film colour & appearance  Light gray or iron red. smooth, flat  GB/T 1729
Viscosity, (T-4)  More than 120 second  GB/T 1723
Dry time (25 degree centigrade)  1h  GB/T 1728
Luster (60 0)  5 ~ 15 %  GB/T 1743
Hardness (swing pole)  0.6  GB/T 1730
Pliability  ≤2 mm  GB/T 1748
Impact Strength  ≥ 40kg.cm  GB/T 1732
Adhesive force  More than Grade 2  GB/T 1720
Water resistant (24h)  no bubble, no peel  GB/T 1733

Reference for construction and notes:
1. Suitable for spraying. Use poly-putty and sand the surface down before spraying.

2. Use thinner and tiana water to dilute and wash the tool. The ratio of thinner is: 15~35 percent,  Viscosity:14~18 second/(T-4,25 degree centigrade).

3. When in winter or humidity is more than 90%, should use the desiccant (white water), and the dosage of desiccant is about 25~45 percent, or may cause poor viscosity in the middle layer, mist, even cause some bubble on the surface. Must not use the bad quality thinner to dilute this product.

4. Suitable for using on the surface of 2K primer and poly-putty, do not use on the surface of the paint of Alkyd, Epoxy fat, Phenoilc aldehyde.

5. The storage life is one year from the date of production (if it is beyond the storage life, please confirm according to the standard inspection; if the quality is still ok, you can used it continuously).

Packing & Storage:
Packing Specification: 1L,4L printing iron drums
Storage Condition: 5-35 degree centigrade, keep in seal and cool dry ventilation place.

More Product Features