Basic Info.
Product Description
Geomembrane--------------------------------------------------------------------------
1) Thickness: smooth surface 0.2mm - 3.0mm, rough surface 1.0-2.0mm
2) Width: smooth furface 1m-8m, rough surface 4m-8m
3) Length: 50m-210m/ roll or as requested.
4) Material: HDPE, LDPE, LLDPE, PVC, EVA.
5) Color: black, white, red, blue or as required.
6) Optional surface: smooth surface, single surface textured, dual surfaces textured.
7) Certificates: CE, ISO9001, ISO14001.
Product Description:--------------------------------------------------------------
HDPE Liners are the ideal choice for most demanding applications. Our specially extruded liners combine high tensile strength and chemical resistance with excellent stress crack resistance and low temperature properties for highly reliable containment. Chemically inert and resistant to most hydrocarbons, these liners are the industry standard for a wide range of applications.
Made of good quality geomembrane primary resin, the main ingredients of our liners are 97.5% of high density polyethylene and about 2.5% of carbon black, anti-aging agent, antioxidant, ultraviolet absorbent and stabilizer.
Our liners are produced by the most advanced imported Italian automatic soil production equipments with three layer coextrusion technology.
Features:-------------------------------------------------------------------------------
1. Easy process and high output rates;
2. Excellent distribution of carbon black;
3. Consistent quality and low failure rate;
4. Non-toxic, tasteless, odorless, long service life;
5. Excellent resistance and good waterproof ability;
6. Anti-aging, anti-ultraviolet, anti oil and salt, anti-corrosion, high temperature-resistant;
7. Good acid and alkali resistance;
8. Good mechanical properties-
High strength, good extensibility, deformation and puncture resistance.
9. Low permeability-
HDPE lining systems are secure because leachate does not penetrate them. Methane gas will not escape from the HDPE cover system, and rainwater will not infiltrate and HDPE cap.
10. Chemical Resistance-
HDPE can resist to a wide range of chemicals, so it isn't threatened by typical solid or hazardous waste leachates. It is also suitable for sludge and secondary containment around chemical storage facilities.
11. Ultraviolet Resistance-
HDPE's resistance to UV exposure is further enhanced by the addition of carbon black. Additionally, with the absence of plasticizers, volatilization is not a problem.
12. Reflective Factor-
White HDPE geomembrane is more reflective because white surface helps mitigate liner temperature and reduce the wrinkle of the liner because of expansion caused by heat and contraction caused by cold. Also white geomembrane is easier for visual inspection.
13. High Density Polyethylene (HDPE) Geomembrane is based on mid or high density polyvinyl resin material and the density is more than 0.94g/cm³, so it is with excellent anti-seepage, high segragation property, high puncture resistance, good abrasion performance.
14. Low-temperature resistance (-70ºC), thermostabilityand great adhesive property.
Specifications of landfill smooth surface geomembrane:
Item |
Test Value |
0.75mm |
1.0 mm |
1.25 mm |
1.5 mm |
2.0 mm |
2.5 mm |
3.0mm |
Minimum Density(g/cm³) |
0.939 |
Tensile
Property |
Strength at yield(N/mm) |
11 |
15 |
18 |
22 |
29 |
37 |
44 |
Strength at break(N/mm) |
20 |
27 |
33 |
40 |
53 |
67 |
80 |
Elongation at yield (%) |
12 |
Elongation at break (%) |
700 |
Tear Resistance (N) |
93 |
125 |
156 |
187 |
249 |
311 |
374 |
Puncture Resistance (N) |
240 |
320 |
400 |
480 |
640 |
800 |
960 |
Stress Crack Resistance (hrs) |
300 |
Carbon Black Content (%) |
2.0-3.0 |
Carbon Black Dispersion |
1 or 2 |
Standard Oxidation Induction Time (OTI) (Min) |
100 |
High Pressure Oxidation Induction Time (OTI) (Min) |
400 |
Impact Cold Crack at -70°C |
Pass |
Water vapor permeability (g.cm/cm2. s.Pa) |
≤1.0×10-13 |
Dimensional Stability (%) |
±2 |
Specifications of landfill textured surface geomembrane:
Item |
Test Value |
1.0 mm |
1.25 mm |
1.5 mm |
2.0 mm |
2.5 mm |
3.0mm |
Rough height (mm) |
0.25 |
Minimum Density(g/cm³) |
0.939 |
Tensile
Property |
Strength at yield(N/mm) |
15 |
18 |
22 |
29 |
37 |
44 |
Strength at break(N/mm) |
10 |
13 |
16 |
21 |
26 |
32 |
Elongation at yield (%) |
12 |
Elongation at break (%) |
100 |
Tear Resistance (N) |
125 |
156 |
187 |
249 |
311 |
374 |
Puncture Resistance (N) |
267 |
333 |
400 |
534 |
667 |
800 |
Stress Crack Resistance (hrs) |
300 |
Carbon Black Content (%) |
2.0-3.0 |
Carbon Black Dispersion |
1 or 2 |
Standard Oxidation Induction Time (OTI) (Min) |
100 |
High Pressure Oxidation Induction Time (OTI) (Min) |
400 |
Impact Cold Crack at -70°C |
Pass |
Water vapor permeability (g.cm/cm2. s.Pa) |
≤1.0×10-13 |
Dimensional Stability (%) |
±2 |
Applications:---------------------------------------------------------------------
1) Environmental protection and sanitation-
Solid waste landfill (primary &secondary containment) of industry or hospital, landfill caps/ closures, scrap yard, sewage treatment plant, power plant adjusting tank, etc.
2) Water conservancy-
Anti-seepage, anti-soaking, plugging and inforcement of river, lake, reservoir, canal, dyke, vertical wall, slope, rockfill dam, concrete dam, potable water reservoir, retention ponds, etc.
3) Municipal Engineering-
Roadbed of subway, highway and underground railway; foundation of the building, construction cofferdam, basement and tunne; planted roof, the garden roof, sewage pipes lining, waterproof layer of expansive soil and collapisible soil, etc.
4) Landscape-
Substrate, slope protection and waterproof of man-made lake, river, lagoon liner, reservoir, golf courses reservoir of the, green lawn, etc.
5) Petrochemical-
Gas storage tank, chemical reaction tank, sedimentation basin lining of chemical plants, oil refinery, gas station, etc.
6) Mining-
Mining heap leach pad, washing pool, heap leaching tank, ash-field, dissolved pool, sedimentation tank, precipitation pool, the yard, tailing dam, the tailing seepage substrates, etc.
7) Traffic facility-
Anti-plugging and reinforcement of subway, highway, railway, culvert, tunnel, etc.
8) Agriculture-
The seepage control of pond, reservoir, water pool, irrigation system, etc.
9) Aquaculture-
Liner, slope protection of breeding pool, fishpond, shrimp pond, sea cucumber circle, etc.
10) Salt industry-
Crystallizing pond, brine pond cover, salt pond plastic covering film, etc.
Sample photos:----------------------------------------------------------------
Our factory:---------------------------------------------------------------------
Tai'an Tengkun Plastic Co., Ltd. is a professional manufacturer and exporter of geosynthetic produts, our factories occupy 26,000 square meters, there are more than 150 staffs, 30 of them are technicians. Our staffs are very professional and most of them have been in this field for more than 20 years, so we have confidence to give you our best quality products with most competitive prices and best service
Our main products include HDPE/LDPE smooth surface geomembrane, textured geomembrane, geotextile, waterproof board, geocell, georid, geosynthenic clay layer, three-dimention geomat and other geosynthetic products. Our products are mainly used as anti-seepage, plugging and inforcement material, they are widely used is envioronmental sanitation, water conservancy, municipal construction, landscape, petrochemical, mining, traffic facility, agriculture, aquaculture and many other industries, for example, landfill, sewage treatment plant, pond, river, lake, dam, reservoir, canal, vertical wall, slope, subway, railway, highway, culvert, tunnel, lawn, petrochemical storage tank, reaction pool, sedimentation basin lining, etc.
We also manufacture all kinds of plastic bags made of HDPE and LDPE, including food bag, garbage bag, drawing string bag, stripped bag, T-shirt bag, etc. We also deal in plastic apron, plastic gloves, master batch, etc. Color, material, printing, size are all customizable.
FAQ:
Q1: Where is your company located?
A:Our company is located in Xintai economic zone, Tai'an City, Shandong Province, China.
Q2: Can you provide a sample for us?
A: Yes,We can send free samples, but customer need to pay the freight.
Q3: What is your minimum order quantity?
A: The minimum order quantity is 2000 square meters.
Geomembrane HDPE/ Nonwoven Geotextile
Q4:What is your payment terms?
A: T/T, Western Union, L/C...
Q5:What is your delivery time?
A: Production time usually takes 7-15 days , depends on the order quantity.
If there is any questions or requests on our plastic products, please feel free to contact us.
Best regards,
Ms. Susan Jia
Tai'an Tengkun Plastic Co., Ltd.
website: http://www.made-in-china.com/showroom/hrd9968
cell: 0086 137 9382 1270
