Hotel Rf Lock-idword2005

Product Description

The software works in Window 98/2000/XP system...Put the Software Disco into the CD-ROM, Use Set up to install.The computer needs at least 64M, HD 500M, CD-ROM, COB or USB interface.

2:Software Setting
A:Preparing RF card, Card encoder, Connect the card encoder with computer, the green lighting means ok.

B:Double click the picture of "Door Lock Manager System", then the register instruction appeared, Put on the register code(please ask us for it when you are installing it.).After that, Put on the password "sys" and confirm.

C:Click "File" and choose "System Date Setting", Filling out all necessary information!In "door lock type", please choose RF50 for Mifare-1 card Lock...The Door Lock compensation time is usually 5 minutes.After finished all this and drop out!

D:Re-open the software again, " Authorized card" read instruction appeared, Take the authorized card and put it on the Card encoder, then confirm.
The software works in Window 98/2000/XP system...Put the Software Disco into the CD-ROM, Use Set up to install.The computer needs at least 64M, HD 500M, CD-ROM, COB or USB interface.

2:Software Setting
A:Preparing RF card, Card encoder, Connect the card encoder with computer, the green lighting means ok.

B:Double click the picture of "Door Lock Manager System", then the register instruction appeared, Put on the register code(please ask us for it when you are installing it.).After that, Put on the password "sys" and confirm.

C:Click "File" and choose "System Date Setting", Filling out all necessary information!In " door lock type", please choose RF50 for Mifare-1 card Lock...The Door Lock compensation time is usually 5 minutes.After finished all this and drop out!

D:Re-open the software again, " Authorized card" read instruction appeared, Take the authorized card and put it on the Card encoder, then confirm.
The software works in Window 98/2000/XP system...Put the Software Disco into the CD-ROM, Use Set up to install.The computer needs at least 64M, HD 500M, CD-ROM, COB or USB interface.

2:Software Setting
A:Preparing RF card, Card encoder, Connect the card encoder with computer, the green lighting means ok.

B:Double click the picture of "Door Lock Manager System", then the register instruction appeared, Put on the register code(please ask us for it when you are installing it.).After that, Put on the password "sys" and confirm.

C:Click "File" and choose "System Date Setting", Filling out all necessary information!In "door lock type", please choose RF50 for Mifare-1 card Lock...The Door Lock compensation time is usually 5 minutes.After finished all this and drop out!

D:Re-open the software again, "Authorized card" read instruction appeared, Take the authorized card and put it on the Card encoder, then confirm.

1.To install the lock correctly
2.To read the Authorized card(each Lock need to read the Authorized only once)
3.To read the Address Card(each lock can read only one address card)
4.To read the Clock Card (Please try to keep the time on lock the same as the time on computer.Time difference need less one minute)
5.Make Floor Card to check, it's better to set test time within 2 minutes.
6.Make Guest Card to check, it's better to set test time within 2 minutes.

The above mentioned 2 minutes is test time, in this way you will know whether the lock time is the same as computer time, whether the address card is right.The lock time will be lost if the power is off.If this happened you need to read the clock once again.Time limited card can not open the Door if the Lock time is lost.

More Product Features