Description of the goods:
Single lever shower mixer
A) High Pure brass
B) Chrome coloured body Or Any other colours also can do it!
C) The technical and quality requirements of our faucet products are summarized as per the followings:
A. The thickness of electroplate
-Copper Plate: Seven-eight (Microm)
-Nickel plate: Fifteen um (micron)
-Chrome plate: One point three(micron)

B. Coating quality:
Corrosion resistance testing-Neutral Salt Spray Test (NSS test) is Two -hundred hours. Upon completion of the salt spray test, apparent surfaces shall not show any defect.

Coating adherence test-sectioning test:
After testing has been carried out at three different places, there shall be neither peeling nor separation for coating.

C. The ceramic cartridges (head-part) that we use are from:
- Spain: Sadel
- China: Ming Shi
- Austria: Kerox
- SCC: Korea
Or up to customer option (Upon our customers request, we could use other appointed ceramic cartridge).

The precise functioning with highest reliability up to Five-Hundred thousand load cycles for opening and closing.

D. The minimum flow pressure to activate the diverter function in our bath/shower mixer is O point Zero five Mpa (Zero Piont Five bar) which is comply to European and international Standard.

E. Our faucets specification:
- Test pressure One Point Six Mpa (Sixteen bar)
- Flow pressure Min. Five in a thousand Mpa (Zero Point Five bar)
Max.: One Mpa (Ten bar)
- Recommended pressure: Zero Point One Mpa to Zero point Five Mpa (One to 5Five bar)
- Temperature at hot water inlet: Max. Nineteen degree C

F. The lead composition of our brass is not exceeding One Point Six% which is comply to EN and other international standard.