Basic Info.
Kind
Two-wire Transmitter
Wire-Assembly Type
Two-wire Transmitter
Product Description
Two-wire 4-20mA Loop Powered isolation IC
Model NO: JSD TAW-100L-F
Size: 32X14.2X8.9mm
Two-wire 4-20mA Loop Powered isolation IC features:
Low cost, small size, SIP12 package with UL94-V0 flame retardant standard
Isolation voltage up to 3000VDC between Signal input and signal output
Provide work without external power supply, no external components
4 ~ 20mA current input, 4 ~ 20mA current output
Industrial temperature range: -45 ~ +85 Celsius
Accuracy class: 0.3, 0.4, 0.5;
High Linearity: 0.1% F. S.
Supplies power to the sensor (10 ~ 30VDC)
Two-wire 4-20mA Passive Loop Powered IC applications:
Analog signal data isolation, collecting
Industrial field signal isolation
Remote lossless transmission
Analog signal ground interference suppression
4 ~ 20mA isolated signal transmission
To the front two -wire equipment provide power supply
Instrumentation and sensor signal transceive
Power monitoring, medical equipment isolation barrier
Selections and Definitions:Product Selection Parameter List: |
Signal Input: | Output Signal: |
Current(mA) | Current(mA) |
4~20mA | 4~20mA |
0~20mA | 0~20mA |
| |
| |
Two-wires 4-20mA passive isolation amplifier IC general description:
JSD TAW-100L-F series isolation amplifier IC is a two-wire loop powered galvanic isolation module, the isolation module IC using electromagnetic isolation technology, To the two-wire devices powered, effective solution to the current signal isolation depends on the power supply and achieve the 4 ~ 20mA standard signal isolation and transmission, Can be used with a variety of instruments analog input interface (PLC, DCS systems, etc. ) match. Analog signal input with overcurrent protection, Can effectively protect the module and the post-stage circuit; Addition, the module's input and output isolation voltages up to 3000VDC.
JSD TAW-100L-F series isolation amplifier products very easy to use, without any external components, can achieve the industrial field signal isolation and conversion functions, and can achieve long-term lossless signal transmission. The product simplifies the user's design, greatly improves the PCB board space utilization.
Electrical Characteristics:Signs | Item | Test Condition | Min | Type | Max | Units |
Isolation characteristics | Isolation voltage | AC,50Hz,(Tested for 1 minute humidity<70%,leakage Current <1mA,) | | 3000 | | V(rms) |
Insulation resistance | 500VDC(input/output) | | 100 | | MΩ |
Transmission characteristics | Gain drift | | | ±35 | ±50 | ppm/ºC |
Non-linearity | | | ±0.1 | ±0.2 | %FSR |
Loop Power | | 10 | 30 | 35 | VDC |
Voltage Output | | | 24 | | VDC |
Signal Input | current | | 4 | 20 | 30 | mA |
Signal Output | current | | 4 | | 20 | mA |
Load capacity | current | RL≤(Us-5)/0.02 Us:Loop power supply voltage | | 250 | | Ω |
Frequency Response | (Small-signal band width)Io=20mA | | 50 | | Hz |
Signal output ripple | | | 5 | 10 | mVRMS |
Power input characteristics | Power supply | Voltage | | ―― | ―― | ―― | VDC |
Power loss | | ―― | ―― | ―― | W |
Range | | ―― | ―― | ― | % |
Other characteristics | soldering temperature | Solder from the shell 1.5mm,10s 1.5mm,10s | | | 300 | ºC |
operating temperature | | -45 | | 85 | ºC |
storage temperature | | -55 | | 105 | ºC |
SIZE | 32*8.9*14.2 | mm |
Weight | | 6.5 | 7.5 | 8 | g |
Pin Function Description:Outputting types | Pin | Function | Pin | Function | Storage |
Passive 4-20mA | 1 | Loop Power input | 7 | NO PIN | Single Inline 12Pin |
2 | Current Output | 8 | NO PIN |
3 | NO PIN | 9 | Current input |
4 | NO PIN | 10 | Current input |
5 | NO PIN | 11 | Voltage output |
6 | NO PIN | 12 | Voltage output |
Notes:1,Please read the user manual carefully before using. If any question please contact our technical support department.2,Please do not use this product in hazardous area. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply.3,Calculating from the date of delivery, during normal use of the product, any quality problems are free repair or replacement by Company during 3 years warranty,4,To avoid invalid, or any failure, users disassemble this product is forbidden5,the product is strictly forbidden demolish without permission for not damage 6,All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.7,In this datasheet, all the test methods of indications are based on corporate standards.
Address:
Huafujin Building 601, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Security & Protection
Management System Certification:
ISO 9001, ISO 9000, BSCI
Company Introduction:
Shenzhen Jie Shengda Technology Co., Ltd. is a collection development, production, trade as one of the high-tech enterprises, it has been dedicating to design and produce AC-DC power modules, DC-DC power modules, high voltage power modules, Medium Voltage Modules, micro-power DC-DC converter, isolation transmitter, isolation amplifier, signal isolation, 4-20mA Isolation Amplifier, 4-20mA series, distributors series, Splitters series, conditioners, two-wire isolation amplifier, active isolation amplifier (optocoupler isolation and magnetic isolation two series), mV-level small signal isolation amplifier, isolation power transmitter, PT100 RTD temprature signal isolation transmitter, power isolation transmitter, fence, V/F frequency pulse isolation transmitter, F/V frequency pulse isolation transmitter, resistors (displacement) signal isolation transmitter, switch signal isolation transmitter, pressure isolation transmitter, non-isolated amplifier, data acquisition converter(D/A converter, A/D converter, RS-232/RS-485) high-tech enterprises. Self-developed products meet international standards, products performance reliability and through EMC Certification (CE certification), the input and output signals are adopting international standard signal designs. (eg: 4-20mA/0-20mA/0-10V/0-5V/1-5V/0-10mA/0-100mV, etc. ) compatible with the vast majority of domestic and foreign well-known brands, our products categories covering more than thousands, is industrial automation applications analog signals, digital signals hybrid integrated circuit development, and manufacturing companies.