Home »
Offer List
»
Others
» Siliconized Interior Acrylic Latex Sealant
Offer Details
Siliconized Interior Acrylic Latex Sealant
| Offer Type: |  |
|---|---|
| Offer Group: | Others |
| Offer Post Time: | 2008-09-19 |
| Expiration Date: | 2009-09-19 |
| Details: | Product description
KTR400 is a pure acrylic latex sealant formulated to provide a fast-setting pliable seal with minimal shrinkage. Features and Benefits KTR400 is an easy gunning, non-staining, general purpose sealant formulated from the highest quality acrylic polymer to offer exceptional flexibility and workability for any commercial construction acrylic sealant application. It can be used indoors or outside, and is tack-free in 15 minutes and ready to paint in 30-45 minutes with latexes or oil-based paint. It also has been tested for acoustical properties to reduce sound transmissions when constructing partition partition walls. Basic Uses KTR400 can be used for general purpose interior and exterior caulking and as a back bedding glazing compound. It is also highly recommended as an acoustical seal in the construction of interior walls, ceiling and floors. It is also suitable for use on vinyl, aluminmum and wood siding as well as on bathroom and fixtures. Colors White, Limestone, Black, Cream, Almond Cream, Eggshell cream, Cedar, Beige Gray, Mortar, and Lava. Packaging 280ml, 10.1oz(300ml) / 310ml cartridges Bulk by drum: 200lt Coverage Rate 35 linear feet of joint per 10.1oz (300ml)cartridge for a 1/4''x 1/4'' joint. For specific coverage rates that include joint size, and usage efficiencies. Applicable Standards KTR400meets or exceeds the requirements of the following specifications: STM C-834, Type OP, Grade- 18C AN/CGSB 19-GP-17M Joint backing Closed cell or reticulated polyethylene backer rod is recommended as joint backing to control sealant depth and to ensure intimate contact of sealant with joint walls when tooling. Where depth of joint will prevent the use of backer rod, an adhesive backed polyethylene tape (bond breaker tape) should be used to prevent three-sided adhesion. All backing should be dry at time of sealant application. |
