Copper Clock
Wind the clock 7days
Dimension: 17.5X17.5X47.5cm.
N. W. (kgs. ) 6

Instruction:
Open the top, disclose the hole of spring, insert the key into the hole, wind up full by the clockwise, the clock will start pendulum automatically.
Notice: If you feel something to hold-back the key, this is because of minute dial over there. Please take out the key, and turn the minute dial, make the spindle of spring no frame, and then insert the key to wind up full.
The finger as the base, turn the minute dial by clockwise, and the hour dial move  relatively, up to your request. If it has error between minute and hour dial, please press the hour dial lightly, not to move the hour dial, and then turn the minute dial a little to the exact clock.
Notice: In the course of rectifying, must be light way, in case the part distorted to have resistance, at last the clock will not work.
When the clock leave the factory, they have been calibrated normally, if you find it has error (fast or slow), please screw the small four nuts on the pendulum window, and demount the square panel and glass, dial the tail of fast/slow finger, become slow by left way, in other way, become fast. Every 1mm match 4-7min.

Notice: Must be careful and light to dial this fast/slow finger, in case break the part.

Every 7 days to wind up for the above tower clock.