300Mbps Wireless ADSL Modem Router

Product Description

300Mbps USB Wireless ADSL Modem Router

-ADSL Compliance

ANSI T1.413 Issue 2

ITU G. 992.1 Annex A (G. Dmt); ITU G. 992.1 Annex B (G. Dmt) with UR2 compliant

ITU G. 992.2 Annex A (G. Lite); ITU G. 994.1 (G. Hs)

Support dying gasp

Maximum Rate: 8 Mbps for downstream and 1 Mbps for upstream

-ADSL2 Compliance

ITU G. 992.3 Annex A and Annex B (G. Dmt. Bis)

Support dying gasp

Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream

-ADSL2+ Compliance

ITU G. 992.5 Annex A and Annex B

Support dying gasp

Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream

-Wireless LAN Compliance

IEEE 802.11g and IEEE 802.11b

Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for 802.11b

Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK (2Mbps) for

802.11b; DBPSK (1 Mbps) for 802.11b

Operating Frequency: 2.4 ~ 2.5 GHz

Operating Channels: Depending on local regulations. For example, 11Channels(Northern America), 13Channels (Europe), and 14 Channels (Japan)

Support the selection of best quality channel automatically RF Transmitter

Output Power (EIP): 13.5 dBm (22mW) for 802.11g, 17.5 dBm (56mW) for 802.11b

TX Spectrum Mask: Comply with IEEE802.11 b/g standard RF Receiver

Sensitivity: Comply with IEEE802.11 b/g standard

External and internal Antenna: Hardware diversity support

Coverage Area: 300 meters (LOS)

Support security standards:

WEP RC4 with 64-bit or 128-bit key length

WPA/WPA-PSK or MIXED Mode / WPA2/WPA2-PSK or MIXED Mode 802.1x

Support the Access Control function: Only registered WLAN clients are allowed to associate to this

Device. SSID can be hidden for the security issue Two SSIDs are supported. The two wireless

Networks can be configured in different wireless security level. Support the Repeater function to

Extend the coverage area Support wireless user isolation for the hotspot

-ATM Features

Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs)

Support up to 16 PVCs for UBR, CBR, VBR-nrt, VBR-rt with traffic shaping

RFC2684 LLC Encapsulation and VC Multiplexing over AAL5

RFC2364 Point-to-Point Protocol (PPP) over AAL5 / RFC2225 Classical IP and ARP over ATM

RFC2516 PPP over Ethernet: Support Relay (Transparent Forwarding) and Client functions

Support PPPoE, PPPoA, MER and Bridged mode; OAM F4/F5 End-to-End/Segment Loopback Cells

-Bridging Features

Supports self-learning bridge specified in IEEE 802.1d;

Supports up to 4096 learning MAC addresses

Transparent Bridging

Transparent Bridging among 10/100 MB Ethernet, USB and 802.11g wireless LAN

Supports IGMP Snooping; Supports 802.1Q VLAN packet pass-through

-Routing Features

NAT (Network Address Translation) / PAT (Port Address Translation) let multiple users on the LAN

To access the Internet for the cost of only one IP address.

ALGs (Application Level Gateways): Such as NetMeeting, MSN Messenger, FTP, Quick Time, mIRC,

Real Player, CuSeeMe, VPN pass

-through with multiple sessions, RTSP, SIP, etc.

Port Forwarding: The users can setup multiple virtual servers (e. G., Web, FTP, Mail servers) on

User's local network.

Support DMZ; UPnP IGD (Internet Gateway Device) UPnP extension for NAT traversal capability

Static routes, RFC1058 RIPv1, and RFC1723 RIPv2

DNS Relay / Dynamic DNS; DHCP Client/Relay/Server

Time protocol can be used to get current time from network time server.

Support IGMP Proxy; Support 802.1Q VLAN Tagging

Support IP/Bridge QoS for prioritize the transmission of different traffic classes

Support port mapping function which allows you to as sign all data traffic transmitted among

Specific Internet connections and LAN ports