LK-02 free nail glue
It is professionally high strength adhesive, which is specially designed for replacing the nails. The surface would not need to drilling, have good water-proof function, with high level and high strength. It applies to ahesive wood, stone, floor installation, aluminum, galvanized iron, steel, concrete etc.
Character: High strength adhesive, good flexibility, fast, easy to install, can be used in outside and inside, water-proof function, mirror and wall could adhesive together.
Surface: It shuold be clean, dry, no-oil, waxless and no loose paint.
Instruction: Free nail glue could adopt double-side adhesive and single side adhesive. The ambient temperature is under 30 degree, which could keep the best using state. After clean up the bonding surface, squeeze the glue pillar with the diameter of 4-6cm, the distance (adhesive joint) between the glue pillar should be less than 40cm, then press these two adhesive surface, and waiting for boinding strenght.
Two-side adhesive: Separately coat two ahesive surface with uniform distriution, then separate them, cool them to flat glue-surface, and then if the surface approach to dry(about3-5 minutes), so reset the location. Use the hammer or mold to knock the surface, to maximize the contact surface, in order to reach the biggest adhesive strength. It is necessary to make the mechnical fixation for 24-72 hours.
Single side adhesive: (Recommended for bearing heavier plate, or need to bear a larger part of heavier plate) Equally coat the glue to one side of the surface, then adhesive it with another face and press them tightly, then use the fixed installation to hold tightly, after the glue is dried, you can remove the installation. When free nail glue adhesive the floor, it could not have the frizzle due to its good flexibility, so it is the best choice for the floor manufacturer. When using, coat the glue into the grooves of the floor, then assemble with the flange, press it hard, waiting for its dry completely.
Cleanness: Uncured adhesive could be cleaned by turpentine or scraper, cured adheisve could be cleaned by knife or sand paper.
Using amount: The amount of 320g can squeeze the glue pillar for 10 meters with the diameter of 6mm.
Safety instruction: It belongs to inflammable, careful for releasing gasses, avoid to absorb many release gases when worin, which is harmless for human body. Using and storage should avoid to contact the fire, spark and other inflammable. Avoid to touch skin and eyes when working, avoid to absorb release gases. Construction Environment should pay attention to ventilation. Avoid high temperature, fire, spark etc inflammable when working. If unexpected accidents happened, please quickly contact with the doctor, and follow the doctor's instruction.
Storage Store inside where possible, out of direct sunlight. Storage areas should be well ventilated and kept to a maximum of 25 degree. Refer to Local, Stale and Federal Regulations.