Walkie Electric Stacker

 European 1500kg Walkie Electric Stacker 
Smart to use!
Popular In European market and for Promtion!!!
 
 
 
1. DC motor.
2. Curtis controller.
3. With explosion-proof valve at the bottom of cylinder,even if the pipe burst,the mast will not rapidly decline.
4. Operating handle is ont he side,allowing operators to work with greater vision.
5. Small turning radius,smart to use
 
 
 
Good Performance

1) DC drive system gives precise control,
  
2) Aluminum cover, good heat dissipation for longer service life.
3) The latest Curtis controller, reliable quality, excellent performance, with regenerative braking.
 
4) Top-class hydraulic, low noise, low vibration, good sealing to ensure smooth and reliable decline.
5) Precision electronic limit switches.
6) Truck circuit lines in nylon casing, wiring clean and corrosio,oil &abrasion resistant.
 
 
Easy Maitenance
7) DC drive motor.
8)Vertical drive motor make the inspection and repair more convenient, which performance much better than the transverse motor.
9) The design of integrated micro-switches, easy for replacement .
10) Cover easy to open, convenient to add distilled water or electrolyte of the battery.
11) Controller self-diagnosis system makes troubleshoothing easier.
 
Safe & Reliable
12) Emergency reverse switch
 
13) Emergency power-off disconnect
 
 
 
 
 
 

 
 
 
 




 
About Us
1.Our company has a professional team with 23 years' rich experience.
2.We have get several patents of pallet trucks and electric products.
3.We keep our 3 controls :quality control,cost control and service control.
4.Our company has passed ISO9001 and most of our products get CE and GS certification of TUV AUSTRIA.
 
 
 
 CE Certificates,Enjoyed good market in Europe
 

 
 
1.  Question: The forks can't be lifted to the max. lift height?
 
           Cause: hydraulic oil is not enough
 
        Solution:  Add appropriate filtrated working oil.
 
 
 
2.  Question: The forks can't return to the lowest position?
 
      Cause  a): Too much hydraulic oil.
 
      Cause  b):  Some parts are deformed or blocked.
 
    Solution a):  Take out appropriate working oil.
 
    Solution b):  Replace the parts or repair.
 
 
 
3. Question: The forks can't drop after lifted?
 
     Cause  a):  The control valve is abnormal.
 
     Cause  b):  The parts are deformed or damaged.
 
   Solution a):  Readjust the unloading device.
 
   Solution b):  Replace the damaged and deformed  parts.
 
 
 
 
 
4. Question:  Hydraulic oil leakage?
 
     Cause  a):   The oil seal is unavailable.
 
     Cause  b):   The pump core and the surface of the plunger is damaged or worn.
 
      Cause c):   The coupled places become loosend.
 
   Solution a):   Replace the oil seal.
 
   Solution b):   Replace the core, plunger and the damaged parts.
 
   Solution c):   Fasten the loosened place again.
 
 
 
 
 
5. Question:  The fork can't be lifted
 
     Cause  a):   The viscosity of the working oil is too high, or there's no working oil.
 
     Cause  b):   There's impurity in the oil.
 
      Cause c):   The valve is abnormal.
 
   Solution a):   Check the hydraulic oil or replace it.
 
   Solution b):   Clear up and add new working oil.
 
   Solution c):   Readjust the unloading device
 
 
 
6. Question:  The forks drop immediately after they are lifted; the handle returns or the forks drop markedly after they are lifted
 
          Cause:   The valve of oil pump is blocked by abnormal matter.
 
        Solution:   Open the control valve and take out the parts. Then re-install the parts after they are cleaned.
 
 
 
 
 
 
 
 
 
 
 
 
 
Our advantages:
1) More than 24 years experience team in manufacturing, service.
 
2) With ISO certificates service and quality is before profit
 
3) Sample order is welcomed
 
4) CE/TUV, ISO certificates
 
5) Free maintenance design
 
6) Fast delivery time within 30days
 
7) Optimized round fork tips ensures easy operation
 
8) 54mm fork thickness ensures high capacity
 
9) Curve design on the fork tips help pallets entry in/out