MIC Chinese Simplified Chinese Traditional English
Inquiry Basket Inquiry Basket (0) item | Recent Visit History | Join Audited Suppliers

Home » Product Directory » Auto Parts & Accessories » Auto Parts » Ignition » Electronic Ignition CdI (CH-125, CY-80)

Electronic Ignition CdI (CH-125, CY-80)

Electronic Ignition CdI (CH-125, CY-80)
Electronic Ignition CdI (CH-125, CY-80)

Product Description

Common CDI
There is original creation power supply of full wave commute. It can enhance the capability of power supply and make the spark much stronger.

AC-DC ignition
1. Dual system boot: Dual ignition system to prevent perils. If any system fails, you can still smoothly ignite the vehicle. Avoiding the problems of can not ignite by DC silicon due to rectifier does not charge or battery hasn=t enough power, and can not ignite by AC due to high voltage coil is burn out.
2. Low rotation rate start up: It can ignite just need the engine rotation rate reach 300 or above, especially for the situation of winter and the battery has not enough power to start up.
3. Automatic adjusting the ignite time: Adopted digital chip, so as to automatic adjust the ignite time.
4. It can ignite by using the high voltage coil of magneto and the battery at the same time. And also it can ignite by using one of them.
5. It can replace the original high voltage coil whithout changing when the high voltage coil is burn out.
6. Applicable to all models with a trigger coil.

Fuel saving CDI
1. It adopted 4213IC of Japanese technology. So that, it can self-check the perfect ignite time to make sure the gas urn can produce the largest power when it ignites.
2. There is original creation power supply of full wave commute. It can enhance the capability of power supply and make the spark much stronger.
Anti-theft CDI

To achieve the purpose of anti-theft, the simple type adopts the electric code lock to control the CDI. The advantages as follow:
(1)Convenient to install: The consumer can easily installing our anti-theft to replace the original one. Then, finish installing by connecting four lines (the output line in red of the electric switch lock, the earthing line in black, 1# control line, and 2# control line).
(2)Convenient to manipulate: The consumer only need to open the electric door lock and press the switch which follow the order of your setting in order to start up.
(3)Difficult to discode: The users can fix the two control lines at will on the positive electricity switch of the motorcycle. (such as left steering light, right steering light, far-reaching headlamp, low beam light, brake lights etc. ) Only pre-set the sequence of two control lines can the motorcycles be started up. If the order is wrong, the motorcycles will be locked at once. The coalescent of electron code lock and motorcycle igniter, so the thief can't start up the motorcycle even if he cut any lines. As a result, the thief has no way to do it.
(4)The price is moderate: The price of the anti-theft product is reasonable. Not only it can be fixed independently but it also can be fixed on the motorcycles which has installed another anti-theft product already. As it is well known, some first class anti-theft product also exists some problems. For example, it will not alarm when the power cord is cut and the motorcycle can drive while cutting off the battle line. But our products mend the above insufficient to assure the motorcycle with double safeguard.

Model Form Storage capacitance Arc shape Minimum continuous ignition speed Continuous Ignition Speed Range Ignition period features Turn off function Operating temperature range        
CH-125 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
CY-80
Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
GY6-125 XF-125 JH-125 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
JH-70  DY-100 Capacitor discharge 1µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
XH-90 Capacitor discharge 1µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
ZJ-125 FXD-125
Capacitor discharge 1µ F AC arc 400r/min 400r/min~11000r/min Ignition advance angle changed by less than 3 " By touching the ground -30º C~+60º C        
                         
Model Form Storage capacitance Arc shape Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function Operating temperature range          
GY6-125 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
JH-70 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
WH-125 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
Model Form Arc shape Operating voltage range Operating current Minimum continuous ignition speed  Continuous Ignition Speed Range Protect  voltage Turn off function Operating temperature range      
GN-250
Capacitor discharge AC arc 8V~16V < 60mA(Static supply voltage 14.5V) 100r/min 100r/min~10000r/min 20V~25V By turnning off the ignition switch -30º C~+60º C      
        < 0.7A(7000r/min, supply voltage 14.5V with the ignition coil )                
GN-125
Capacitor discharge AC arc 8V~16V < 40mA(Static, supply voltage is 14.5V) 200r/min 200r/min~12000r/min 20V~25V By turnning off the ignition switch -30º C~+60º C      
        < 1.2A(500r/min, supply voltage is 14.5V, with the ignition coil )                
Model Form Storage capacitance Arc shape Operating voltage range Operating current Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function Operating temperature range      
ZJ-125 Capacitor discharge 1.5µ F AC arc 8V~16V < 30mA(Static, supply voltage 14.5V) 200r/min 8000± 100r/min By touching the ground -30º C~+60º C      
          < 0.5A(7500r/min, supply voltage 14.5V)              
Model Form Storage capacitance Arc shape Operating voltage range Operating current Minimum continuous ignition speed  Continuous Ignition Speed Range Ignition voltage Protect voltage Turn off function Operating temperature range  
WH-100
Capacitor discharge 1.5µ F DC arc 8V~16V < 30mA(Static, supply voltage 14.5V) 200r/min 200r/min~11000r/min 190V± 20V 26V± 2V By turnning off the ignition switch -30º C~+60º C  
          < 0.5A(8000r/min, supply voltage 14.5V)              
Model Form Storage capacitance Arc shape Operating voltage range Operating current Minimum continuous ignition speed  Continuous Ignition Speed Range Ignition period features Resistance rate of rise of forward current SCR Withstand the maximum current Turn off function Operating temperature range
TBT SCR switch 10µ F/400V AC arc 8V~16V < 0.2A(1500r/min) 150r/min 150r/min~10000r/min(With batteries) Start speed: 2100r/min± 200r/min 15" ± 1" dv/dt=20A/µ s 100A/30µ s By turnning off the ignition switch -30º C~+60º C
          < 0.6A(8000r/min)   400r/min~10000r/min(Whithout batteries and load) Final speed: 3500r/min± 200r/min 30" ± 2"        
                         
Model Form Storage capacitance Arc shape Operating voltage range Operating current Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function Operating temperature range      
CH-125
Capacitor discharge 1.5µ F AC arc 8V~16V < 30mA(Static, supply voltage 14.5V) 200r/min 8000± 100r/min By touching the ground -30º C~+60º C      
          < 0.5A(7500r/min, supply voltage 14.5V)              
Model Form Storage capacitance Arc shape Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function Operating temperature range          
GY6-125 XF-125 JH-125
Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
                         
Model Form Storage capacitance Arc shape Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function Operating temperature range          
CH-125
Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
GY6-125 XF-125 JH-125 CBT-125 Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
JH-70 DY100 Capacitor discharge 1.0µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C Ignition advance angle changed by less than 3 "        
ZY-125
Capacitor discharge 1.5µ F AC arc 400r/min 400r/min~11000r/min By touching the ground -30º C~+60º C          
Model Form Storage capacitance Arc shape Resistance rate of rise of forward current SCR Withstand the maximum current Maximum ignition voltage Minimum continuous ignition speed  Continuous Ignition Speed Range Turn off function      
ZJ-125 FXD
SCR switch 1.5µ F/400V AC arc dv/dt=10A/µ s 100A/30µ s 270V 350r/min 350~10000r/min By touching the ground      

More Product Features

   
HS Code:  8502200000
Trademark:  Epower, NCP, Plardin
Model NO.:  CH-125,CY-80,GY6-125 XF-125 JH-125,JH-70
Standard:  GBJ94011-89
Productivity:  100, 000
Origin:  Foshan
Packing:  Carton or Polybag or According to Customer Require
Color:  Black, Orange
Wire:  Whith Wire/Whithout Wire
Shape:  Cuboid, Cube
Export Markets:  North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Company: Foshan Epower Equipment Factory

Click here to send inquiry

Most Popular

Recommended Products

Quick Products