Solar Charger (586J-2)

Product Description

I. Product Characteristic

1. HJ-586J-2 adopts high efficient solar cell, suits outdoor task, tour, risk and any other situation Where emerrgency or green power is needed.
2. HJ-586J-2 has a lithium battery of 2600mAh, 11.1V as its standbby cource. This makes its Discharge time and useful life longer.
3. HJ-586J-2 has muti-output and multi-transfer-pin, can be used for handset, digital camera or Portable computer.

2. Function of indicators and ports Battery Low Indicator: When the battery voltage is low, the red low indicator light will be on. Please Take off the equipment at once and renew the standby battery at the short time. Charge Indicator: When the standy battery is being charged by solar, the green charge indicator light Will be on. After cgarged, the green will turn off, If using External Charger Input port to Charge, the green light has NON-efficiency. External Charge Input: When sunshine isn't strong enough, please use esternal source to charge the Standby battery by this port.

5.6V DC output: Using transfer, charging the batteries of different handsets, the max current is 350mA.

IV. Note
1. Before connceting to this production, please check the input voltage of equipment. An unsuitability Voltage will mangle the equipment or the charger.
2. During charging for portable computer, please pay attention to positive polarity and negative polarity of transfer plug to avoid damage to charge equipment which cause by wrong connection of polarity.

3. It it better that turning off the equipment before charging. If the equipment must be used, please turn On the equipment after charging for fifteen minutes.
4. During the charging, if the red light on, it means that the standby battery I used up. Disconnect the Equipment immediately please.

5. If the standy battery is low, must charge it at short time, or the battery performance will be serious effected.
6. Solar cell board adopts the toughened glass laminated technique; It is strong enough for some collision. But a sharp edge will exscind the glass, destroy the solar cell.
7. Cleaning the surface of solar cell board frequently, will gain a higher perfermance of photoelectric Transform.