LED Sound Control Lamp

Product Description

Where there is man, there is light, which is no longer an old saying but fully fulfilled by Auto Lamp and Multi-functional lamp. Added with a battery, they can also work at power cut; Many working modes are optional to multi-functional lamp; Source of light, controller and power converter are integrated into one lamp, which frees you from extra switches; Controller automatically controls the lamp by receiving infrared signal and sound from man.

Induction sensor Lamp (AL100, AL100B: Battery Type), Sound Control Lamp (AL200, AL200B: Battery Type)

1. Introduction
Inside each fire-resistant housing are equipped LEDs, photo switch, infrared sensor, power converter. And the base is Edison base or bayonet base, where no switch is needed. It is fairly easy to install and remove the lamp. Full automation of the lamp is fulfilled by receiving infrared signal and sound from man.

2. Functions
In the dark or dusk (ambient illuminace ≤ 1 lux), this light will turn on automatically if there is one walking or moving, or there is sound (like screaming, applauses, horns)within its induction area, and keep on lighting for about 45 seconds after the effective moving or sound stops.

3. Advantages
Convenience (it can be installed like a light bulb and free from any switch), Energy Saving (Annual power consumption is less than 2 kilowatt-hours), long working life (it can be used for over 5 years on normal conditions), Safty (no heat dissipation nor radiation), high brightness(brightness can be equal to that of 25-W incandescent lamp).

4. Applications
It is Suitable for Corridor; Washing Room; Front Door; Cloak Room; Ware House Basement, Garage; All kinds of passageways, and so on.

Item Specifications Value Unit
1 AC Input Voltage
180260@50Hz
V AC
2 Maximum Rated Power 6 W
3 Static Power Consumption 0.1 m W
4 Working Temperature ≤ 50 Celsius
5 Luminous Flux 120 Lm
6 Light Radiation Angle 60160 Degree
7 Ambient Illuminance ≤ 1 Lux
8 Lighting time of delay 3060 S
9 Induction Angle 90 Degree
10 Induction Distance 5 meters
11 Sensitivity of Sound Control 65 dB
12 Working Life(On and off 100 times per day and for 1 minute lighting each time)>5 Year
13 Discharge Rate of Battery(Time/times) 1/60 Hour/time
14 Dimension ( Diameter/ Length) 50/75 Mm
15 Weight 50(65) g

Note:
1. Voltage of 80~130V AC/60Hz is also available if the lamp is specified as 110VAC. There is a tube connected to the lamp holder.
2. Rechargable Nickel-hydrogen battery is used; Absolute security, none pollution to the environment are garanteed, and the lamp is free from maintenance.
3. Use: Simply install the lamp to E27 or B22 lamp holder.

Cautions:
When being installed, the LED induction light must be far away from heat or cold producers such as heater, air conditioner, microwave oven, and producers of electromagnetic field.

Make sure that the Induction window/Fresnel lens is not faced to windows or areas where air flow and light are great. Its induction distance may become shorter when the ambient temperature is higher than that of human bodys, and this is normal.

LED sound activated lights LED voice activated lights, LED audio control light, LED audio control lamp
LED sensor lamp LED sound control lamp AL100 AL101 AL102 AL200 AL201 AL202 AL302 AL102T