Latest 8 Far-End Jacks Cable Length Tester

Product Description

This tester is very easy to operate for prevent and solve cable installation problem. It can widely be used for a number of applications such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit, jumper or cross-talk interference.

Features
8 Far End Jacks (Include ID1~ID8)
Do the cable continuity check in a nice and easy way
Check wiring error in 5E, 6E, coaxial cable and telephone line
Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
Find the location of wiring or connection error
Measure cable length and determine the distance of open circuit and short circuit
Dynamically calibrate cable length and make length measurement as accurate as 97%
Long battery life (standby mode for over 50 hours)
Auto time delay shut off
Measure length and pair with or without far-end recognizer
Locate cable and there is 8 far-end passive jacks (Only one jack is included in this auction)
Far end recognizer with prompt voice
Self checking function and auto compensate any change in battery capacity or ambient temperature
Optional RJ-11 Adapter and BNC Adapter (1 pair)

Specification
LCD: 4 x 16 characters big screen (valid visual field 61.6 x 25.2 mm)
Type of Tester Cable: STP / UTP twin twisted cable, coaxial cable, telephone line
Tester Port:
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R).
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
Length Measurement of Twin Twisted Cable:
Scope: 1350M (31, 200 FT)
Calibration accuracy: 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
Display: M or FT
Length Calibration: User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5M.
Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference.
Locating Cable: Included 1 far-end passive test jack
Working Ambient Temperature: -10° C to 60° C
Use 4 x AA batteries (Not included)
Item size: Approx. 180 (L) x 80 (W) x 40 (D) mm (7.09' x 3.15' x 1.57' inch)
Item Weight: Approx. 246 g (8.68 oz)

One set include
1 x Network Cable Tester
8 x far-end test jack (ID1~ID8)
2 x Optional RJ-11 Adapter and BNC Adapter
1 sheet full instruction manual
Standard factory box package