LED Solar Navigation Light Boat Light White Anchor Light

Usage Range:

Installed on boat, for the sailing at night, it functions with the light signal collision avoidance.

Characteristics:

1 The shell is made of good quality engineer plastic; Lampshade adopts good quality PC which is UV-stabilization.

2 The shell structure has fine seal performance, and it's convenient to install and remove.

3 The light conforms to international regulation for preventing collision at sea, 1972 and grade entry norms for steel ships.

4 The light conforms to the standard of marine electric signal light's technical condition GB/T 3028-1555.

5 The light is approved by CCS (China Classification Society) and ZY of China fishery inspection.

6 For the sailing at night, it functions with the light signal collision avoidance.

7 The bottom of the light is designed with drain holes for water to leak out automatically.

8 The lens use PC which qualifies it with the characteristics of UV stabilization and color maintenance.

9 This light adopts multicrystalline solar electrical system. There is a high-grade maintenance free Lead Acid Battery inside the light. The solar module supplies the Lead Acid Battery with electricity during the daytime, while the battery provides power to the light. The light source is called LED which can decrease volume of the solar module as well as the battery.

10 The double solar modules obstruction light is more suitable for navigation. When there is no fixity, it can guarantee that at least one solar module will face up to the sunshine in the process of rotating, which greatly increases the efficiency for generate electricity. The light can produce strong flash with high-quality materials, advanced circuits and reasonable structure.

Specification

Light Characteristics

Light Source
Ultra-high intensity LEDs

Available Color
Red

Sector
112.5 degrees

Available Flash Characteristics
298 including steady-on

LED Life Expectancy
>100 000 hours

Visibility
Min. 3 n. M

Electrical Characteristics

Nominal Voltage
DC 12V

Nominal Power
10W

Solar Characteristics

Solar Module type
Multicrystalline

Output
10W*2

Solar Module Efficiency
>14%

Charging Regulation
Microprocessor controlled

Power Supply

Battery Type
High-grade maintenance-free Lead Acid Battery

Battery Capacity
55Ah

Nominal Voltage
DC 12V

Autonomy
15 days

Physical Characteristics

Type
Double Tier

Body Material
Stainless steel

Lens Material
Polycarbonate-UV stabilized

Mounting
4× 14mm holes on 120mm PCD

Length
680mm

Width
330mm

Height
650mm

Mass
30kg

Life Expectancy
Up to 12 years

Environmental Factors

Humidity
0_100%

Waterproof
IP56

Wind Speed
160km/h

Temperature Range
-40-70 degrees