Ceramic Tile & Porcelain Tile

Product Description

Soluble salt polished tile is belong to Polished tile(Polished porcelain tile)-

Polished porcelain tile available Sized: 400x400, 450x450, 500x500, 600*600mm and up, polished porcelain tile are available.

Our polished porcelain tile including: White-beige polished porcelain tile series; Yellow-beige polished porcelain tile; Pure color polished porcelain tile.

Polished porcelain tile are widely used for residential and commercial application.

Aslo we supply ceramic tile with various size and colors.

Ceramic tile is different to polished porcelain tile with some characters. Ceramic tile is also widely used for building coverings. Ceramic tile&polished porcelain tile of China original have very competitive with good quality. And tile&polished porcelain tile of China original are popular all over the world.

Tile Glossary:

1. Porcelain tile is a tile that is generally made by the dust pressed method from porcelain clays which result in a tile that is dense, impervious, fine grained and smooth, with a sharply formed face. Porcelain tiles usually have a much lower water absorption rate (less than 0.5%) than ceramic tiles making them frost resistant or frost-proof. Glazed porcelain tiles are much harder and more wear and damage resistant than non-porcelain ceramic tiles, making them suitable for any application from light traffic to the heaviest residential and light commercial traffic. Full body porcelain tiles carry the color and pattern through the entire thickness of the tile making them virtually impervious to wear and are suitable for any application from residential to the highest traffic commercial or industrial applications. Porcelain tiles are available in matte, unglazed or a high polished finish.

2. Ceramic tiles are generally made from red or white clay fired in a kiln. They are almost always finished with a durable glaze which carries the color and pattern. These tiles are used in both wall tile and floor tile applications, are softer and easier to cut than porcelain, and usually carry a PEI 0 to 3 rating. Non-porcelain ceramic tiles are usually suitable for very light to moderate traffic and generally have a relatively high water absorption rating making them less frost resistant and they are more prone to wear and chipping than porcelain tiles.

POLISHED TILES TECHNICAL STANDARD

	Product standard	European Standard	National standard	Our standard
Water absorption		≤ 0.5%	≤ 0.5%	Average value E ≤ 0.1% Individual value E ≤ 0.1%
Breaking strength modulus of rupture		≥ 27MPa	Average value ≥ 35MPa Individual value ≥ 32MPa	≥35MPa
Length		+/-0.6%	+/-0.2%	+/-0.1%
Width		+/-0.6%	+/-0.2%	+/-0.1%
Thickness		+/-5.0%	+/-5.0%	+/-3.0%
Surface smoothness		+/-0.5%	+/-0.2%	+/-0.15%
Side straightness		+/-0.5%	+/-0.2%	+/-0.15%
Squareness		+/-0.6%	+/-0.2%	+/-0.15%
Abrasive resistance		< 205mm 3	≤ 175mm 3	<175mm 3
Coefficient of linear thermal expansion		<9x10 -6 K -1		<7x10 -6 K -1
Hot vibration resistance		OK	No rupture or crack occurs after 10 cycles of rapid cooling and rapid heating.	The product is qualified when no rupture or crack occurs after 10 cycles of rapid cooling and rapid heating.
Freezing resistance		EN176	No crack or peeling occurs after freezing test.	The product is qualified when no crack or peeling occurs after freezing test.
Glossiness			≥ 55 degree	≥ 60 degree
Radioactive