Inquiry Basket (
Below is a group product of Welding and Cutting accessaries.
Product List
Show all products
» Welding and Cutting accessaries (Total 14 Products)
1. Welding Cart
When using fuel and oxygen tanks they should be fastened securely upright to a wall or a post or a portable ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]2. Welding Cable (35MM2)
The flame is applied to the base metal and held until a small puddle of molten metal is formed. The puddle ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]3. Welding Accessary
QISHENG is a private enterprise established inNingBo, Well known as a Welding and cutting base. Acting as a ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]4. Welding Gauge
Welding gauges suitable for use with Oxygen, other fuel gases and medical equipment. Which are non ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]
6. Tip Cleaner
For cutting, the set-up is a little different. A cutting torch has a 60 or 90-degree angled head with ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]7. Cylinder
Oxygen and Acetylene are stored under pressure in steel cylinders. They are sized by the cuft. Of either ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]8. Jumper Cable
Car booster cable
The booster cable & battery cable are produced according to U. S. A SAE Standard, German ...
[Last Updated: 2009-12-23]
The booster cable & battery cable are produced according to U. S. A SAE Standard, German ...
[Last Updated: 2009-12-23]
10. Roller Guide
Welding refers to the uniting or fusing of pieces by using heat and/or compression so that the pieces form ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]11. welding stand
Oxygen and Acetylene are stored under pressure in steel cylinders. They are sized by the cuft. Of either ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]12. Booster Cable
The booster cable & battery cable are produced according to U. S. A SAE Standard, German DIN Standard, ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]13. Wire Feeder
The wire feed unit supplies the electrode to the work, driving it through the conduit and on to the contact ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]14. Circle Cutting
A cutting torch has a 60 or 90-degree angled head with orifices placed around a central jet. The outer jets ...
[Last Updated: 2009-12-23]
[Last Updated: 2009-12-23]
