E-glass chopped strand mat is made from fiberglass strands chopped to length and bonded together with powder binder.Chopped strand mat is used primarily for hand lay-up processes,filament winding and press molding of FRP products.Typical products include bathroom accessories,pipe,buildin materials,automobiles,furnitures and other FRP products.
Technical specifications:
R2O Content: <0.8%
Filament diameter:11¦Ìm-13¦Ìm
Moisture:¡Ü0.2%
Loss on Ignition:2%-9%
Binder Type Powder or Emulsion
Compatible Resin: Polyester
Styrene Solubility <50seconds

Product Characteristics:
1.Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.
2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.
3.High mechanical strength and high wet strength retention.

Product specification:

Product code Width(mm)  Compatible resin  Breaking Strength(N/150mm)
EMC200  ¡Ü3200  EP/UP  35  
EMC225 ¡Ü3200 EP/UP 35
EMC300 ¡Ü3200 EP/UP 40
EMC450 ¡Ü3200 EP/UP 60
EMC600 ¡Ü3200 EP/UP 60
EMC900 ¡Ü3200 EP/UP 70


*Special:products are according to customer's requirements.
Individual and bulk packaging:
Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.
Each standard pallet with the size of 1280mmx960mmx120mm contains 12 of rolls with the packaging type of 4x3.
Static stacking of the pallets is possible up to one high.
Storage:
The EMC should be stored dry and in its original packaging.The best conditions are temperature between 15degree to 35degree and at a relative humidity between 35% to 55%.