Gigabit Ethernet Routing Switch (OP-S9012)

Product Description

OP-S9012 Ethernet Switch is a new generation data traffic production. This Switch uses appropriative BROADCOM Switch-Chip as the core, providing 10/100/1000Mbps wire-speed data switch, combining Layer-3 switch function.
OP-S9012 has 4 SFP fixation slot and two extend slot which can choice 8 1000BASE-T or 1000M optical Module. It has intellect flow control and perfection QOS characteristic.
It can supply 4094 802.1Q Vlans base on port.
OP-S9012 Ethernet Switch is a dedicated Ethernet switch featuring high performance Layer-2/Layer-3 switching for construction of the campus network or department of a large enterprise and for intelligent community network access. It also can be used to connect the Broad Band section, cooperating with special software (options: Authentication and Count).

Features:
Backplane: 24Gbps
Mac address: 16K
Wire speed on all port: Full-wire speed (full-duplex) operation on all ports
Transmission Method: Store-and-forward
Latency: <10μs(64 bytes packets)
Throughput: 6.6mpps(64 bytes packets)
Specification:
Port mirroring: Yes
VLAN: IEEE802.1Q VLAN(256)
GVRP: Yes
STP: IEEE802.1D
QOS 802.1P: Yes, support 4 queues
TOS: Yes
Diffserv Yes
Port aggregation: Six group in maximum, each group can aggregate eight ports in maximum
Security Mac binding: Yes
Mac filtering: Yes
Access list based on: MAC / VLAN / 802.1p / Diffserv (DSCP) / IP address
Protocol type / TCP/UDP destination port number
IEEE 802.1X: Yes, mac-based
RADIUS: Yes
Virtual stacking: Yes
Flow control: Full-duplex 802.3x
Half-duplex backpress
Inhibitation of broadcast/multicast/DLF storm: Yes
Bandwidth control: Yes, per steps 1Mbps
Multicast IGMP snooping: Yes
IGMP V1/V2
SNMP: V1/V2C
Route protocol RIP V1/V2
OSPF V2
SUPERVLAN: Yes
DHCP, 2, 3, 9 group
Management Support: CLI, WEB, TELNET, SNMP
Firmware: Upgrade Tftp
Syslog: Yes

Physical & Environmental
Parameter Detailed Description:
Operating Temperature 0C~55C
Storage Temperature -40C ~ 70C
Humidity 10%~90% non-condensing
Weight: 4.5Kg(not include extend Module)
Power suppliers AC 110~240 VAC, 50~60HZ