Hot Sales Hot DIP Galvanized Gi Steel Inclined Ladder

Steel ladder/
1. Brand Name: YC-SG03
2. Material&Surface Treatment: Carbon Steel Q235 or Stainless Steel &HDG or Polish
3. Min. Order Quantity: 10 pieces (500kgs)
4. Supply Ability: 1000 square meter/day (100tons/day)
5. Price Range: USD 12-90/ square meter (700-950/ ton)   
6. Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal
7. Delivery Detail:
Within 10-20 days once we receive the confirmed order
8. Description:
Steel ladder is made of steel grating which is load flat steel bar and cross bars, placed horizontally and vertically, and at an equal pitch apart, by welding with 200-ton hydraulic resistance automatic welding equipment, then cutting, punching and banding ends.
9. Characteristics of the Products:
Steel ladder produced according to National standards, after hot-dip-galvanized finish, the fence, stair treads and ladder become more beautiful and strong, and they are easy to install and maintain.
10. Specification:
              (1) Quality Standard
   (2)Product specification
   (3)Type
    A. Vertical Ladders
Vertical ladders are used for platforms which is with limited access and places where other structures are not allowed by the situation. Beams are made of angle bars(≥50×50×5)or flat bars(60×8) and rungs of round bars(≥φ20mm) with the optimum width of 500mm and other width of 600mm and 700mm, with the ladder height is within 5m, the width could be de-sized but shall be over 300mm. Guarding cages are required when the ladder height is over 3m with the distance between the bottom and the datum place of 2000-2400mm and the top which id higher than the datum plane sharing the same height with the fences satisfying Chinese Standard GB4053.3. Resting platforms with guarding fences for climbers could have enough rest are required when the height is over than 9m. Thus the ladder would be safe and steady and enjoy its appearance.
   B. Inclined Ladders
   Inclined ladder are classified into three categories: A with the height less than 2500mm,B 2500-5000mm and the height less than 5000mm, if over 5000mm, we must need "c", the rest platforms are required. While decide the ladder width, the angle of the inclined ladders should be considered, and usually the optimum is 700mm with alterations such as 600,800,900,1000,1100mm etc.
C. Reference Beams in accordance with Angles:
 
    Note:
1.      The preferred beam is1Ba.
2.      Beams can be adjusted as per customer's needs.
3.      Beams can be designed as per customers' requirements and the site situation.
 
D. Table:Tread height=R, tread width=l30 l 40.
Inclined ladders' angles are usually between 40°-59°and the preferred is 45°.
L30 means pitch of tread bearing bars are 30mm, L40 means 40mm (whereas with the regular font id good to T1, T2 treads and the Italic to T3 and T4 treads). The width can be changed as per customers' needs.
11. Manufacturing Process:
Steel grating have been fabricated strictly in accordance to the product quality standards, and their high quality is guaranteed under the control of ISO9001 quality system.
12. Application:
Mainly used for industrial platform, staircase pedal, banister, channel service, railway, bridge, the tower platform, high above the floor drain cover, road barrier, schools, factories, enterprises and institutions, the stadium fence, also can use the residence outside the window, balcony guardrail, highway, rail barrier, etc.
13. Packing & Transportation:
The packing of steel grating is normally packed in piling up ways with two pieces of square wood on both upper and bottom sides. There are four or six pieces of M10 long bolt penetrating the gratings and screwing together. It is suitable for loading and unloading by fork-lift and crane.
              Note: We can pack as the requirements of customers.
14. How to Order?
              a. Kindly indicate the specifications, sizes, quantities, and required surface treatment of steel grating.
              b. Give type and quantity of fastener. In principle, each piece of grating needs four set of fasteners.
              c. Please offer construction plan when big floor areas are required to cover with steel gratings. Also provide constructional elevation drawing and joint details as well as the section size and location of supporting steel beam, if any openings are required on such floor areas.
              d. When ordering stair treads, please state out types of stair treads, and the specification, length, width, quantity and required surface treatment for gratings used.
              e. For more information, please contact our company's sales department .We shall do our best to help you.
15. Why choose us?
              a. We are a company of steel grating located in the Hometown of Wire Mesh-Anping.
              And it is a professional factory founded in 1993, meanwhile, our price is highly competitive in the market.
              b. We have fully automatic welding equipment taking the place of the original manual welding machines. The new welding technology is in advance. It can make solid, good, uniform joints.
              c. In addition, we have leading domestic CAD steel grid plate designing system, which can provide users with accurate product drawings and installation drawings. Customers can get installing guiding, too.
              d. The punctual delivery of goods.
              f. Good after-sales service.
16. FAQ
          A: Can I negotiate the Prices?
          Yes, we may consider discounts for multiple container load of mixed goods or bulk orders of individual products.
          B: What is your minimum order requirement?
          One site is ok, every customer can deal with us.
          C: How long will it take to execute my order?
          This depends on the size and complexity of the order. Please let us know the quantity and specification of the fencing so that we can advise a production schedule.
          D: Do you provide samples?
          Yes, we can supply samples for test.
          E: How much will the shipping charges be?
          This will depend on the size of your shipment and the method of shipping. When inquired about shipping charges, we hope that you let us know the detailed information such as the models and quantity, your favorable method of shipping, (by air or by sea,) and your designated port or airport.
          F: Can you give warranty of your products?
          Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with the quality or service. For the overseas orders, we guarantee most accessories. Provided emails with details including pictures or short video, we will send guide manual or replacements at our cost to repair.
          G: Can I visit you?
          Sure. If you would like to visit our factory, please contact us to make an appointment.
          H: How can I know how my order is being done?
          We will inspect and test all items in order to avoid damage and missing parts before shipping. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.
          I: OEM Capability?
          All OEM orders are welcome. We have fully automatic welding equipment taking the place of the original manual welding machines. The new welding technology is in advance. It can make solid, good, uniform joints. In addition, we have leading domestic CAD steel grid plate designing system, which can provide users with accurate product drawings and installation drawings. Customers can get installing guiding, too.