Inquiry Basket (
Home » Product List » Lathe » Bench Lathe (C0632A TOP)
Product Details
Bench Lathe (C0632A TOP)
Product Description
1.This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan.
2.This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling.It has high precision and long life.
3.The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises.
| Model | C0632Ax750 | C0632Ax1000 | C0636Ax750 | C0636Ax1000 | |
| Swing over bed | 330mm | 360mm | |||
| Swing over cross slide | 198mm | 212mm | |||
| Swing in gap diameter | 476mm | 491mm | |||
| Swing in length | 210mm | 210mm | |||
| Center height | 166mm | 166mm | |||
| Admits between | 750mm | 1000mm | 750mm | 1000mm | |
| Bed width | 187mm | 187mm | |||
| Bed length | 1248mm | 1655mm | 1363mm | 1655mm | |
| Bed height | 290mm | 290mm | |||
| Spindle bore | 38mm | 38mm | |||
| Spindle nose | D1 -4” or A2 -4” | D1 -4” or A2 -4” | |||
| Taper in nose | No. 5 morse | No. 5 morse | |||
| Taper in sleeve | No. 3 morse | No. 3 morse | |||
| Speeds number | 8 or 16 (pole changeable motor) (optional) | 8 or 16 (pole changeable motor) (optional) | |||
| Speeds range | 70-2000rpm or 35-2000rpm (2 speed motor) | 70-2000rpm or 35-2000rpm (2 speed motor) | |||
| Cross slide width | 118mm | 118mm | |||
| Cross slide travel | 160mm | 118mm | |||
| Compound rest width | 76mm | 76mm | |||
| Compound rest travel | 68mm | 68mm | |||
| Lead screw diameter | 22mm | 22mm | |||
| Lead screw thread | 8 TPI or 3 mm pitch | 8 TPI or 3 mm pitch | |||
| Feed rod diameter | 19mm | 19mm | |||
| Cutting tool max section | 16x 16mm | 16x 16mm | |||
| Threads imperial pitches | 36 Nos. 8-112 TPI or (34 Nos. 456 TPI) | 36 Nos. 8-112 TPI or (34 Nos. 456 TPI) | |||
| Threads metric pitches | 28 Nos. 0.2 -5mm pitch or (26 Nos. 0.4 -7mm pitch) | 28 Nos. 0.2 -5mm pitch or (26 Nos. 0.4 -7mm pitch) | |||
| Threads diametral pitches | 36 Nos. 8-112 D.P | 36 Nos. 8-112 D.P | |||
| Threads module pitches | 22 Nos. 0.2 -3 M .P. | 22 Nos. 0.2 -3 M .P. | |||
| Longitudinal feeds imperial | 36 Nos.0.0019 ~0.0273” /Rev. or (32 Nos. 0.002 ~0.548” /Rev) | 36 Nos.0.0019 ~0.0273” /Rev. or (32 Nos. 0.002 ~0.548” /Rev) | |||
| Longitudinal feeds metric | 36 Nos.0.050 ~0.696mm /Rev. or (32 Nos. 0.052 ~ 1.392mm /Rev) | 36 Nos.0.050 ~0.696mm /Rev. or (32 Nos. 0.052 ~ 1.392mm /Rev) | |||
| Cross feeds imperial | 36 Nos.0.0006~ 0.0094” /Rev. or (32 Nos. 0.0007 ~ 0.0187” /Rev) | 36 Nos.0.0006 ~ 0.0094” /Rev. or (32 Nos. 0.0007~ 0.0187” /Rev) | |||
| Cross feeds metric | 36 Nos.0.013~0.188mm /Rev. or (32 Nos. 0.014~0.380mm /Rev) | 36 Nos.0.013 ~0.188mm /Rev. or (32 Nos. 0.014 ~ 0.380mm /Rev) | |||
| Quill diameter or optional | 32mm | 32mm | |||
| Quill travel or optional | 100mm | 100mm | |||
| Quill taper or optional | No. 3 morse | No. 3 morse | |||
| Set over | 10mm | 10mm | |||
| For main motor | 2HP, 3PH or 2HP, 1PH | 2HP, 3PH or 2HP, 1PH | |||
| Model NO.: | C0632A TOP |
|---|---|
| Trademark: | SJMC |
