Hydraulic Dock Leveler

Product Description

Introduction of Hydraulic Dock Leveler
Hydraulic docklevelers are designed and built to meet the demands of high-volume loading docks
It is the most frequently and widely used dockleveler at present which is characterized by stable performance, easy-to-use operation, low maintenance rate and simplicity for repairing.
Components and construction
The Hydraulic Dock Leveler is built up of the following components:

1. Platform Assembly:
Platform to be constructed of unitized, robotically welded high tensile steel safety tread deck plate. Exclusive "I" beam deck supports optimize twist resistance and stress distribution. Deck to be on 8-15Tons static capacities; On 5-10Tons dynamic capacities.
2. Lip Assembly:
Lip to be 5/8"(16mm) thick, 153/4" (400mm)length. Self-cleaning lug-style lip hinge. All units to be tensile steel safety tread lip plate with chamfered leading edge. Lip rod to be a minimum of 1"-1.2"(25-30mm)solid steel on all capacities.
3. Open Subframe structure:
All Sucus docklevelers are built with an open frame design to provide easy access to the pit floor for routine cleaning and scheduled maintenance.
4. Power Unit:
Power unit is an electric hydraulic pump and valve assembly. Power unit is mounted to unit subframe (elevated off pit floor).
5. Electrical:
Available in 380V/50Hz/0.75Kw or 220V/50Hz/1.1Kw. Built-in motor overload protection as standard.
6. Hydraulic:
Main cylinder minimum 2-1/2"(63mm) inner diameter bore; Lip cylinder 2"(50mm)inner diameter bore. All weather hydraulic fluid with viscosity of 15 cSt at 40º C(100º F). Totally enclosed non-ventilated hydraulic pump and motor assembly with single hose to cylinder for longer life and lower maintenance costs.
7. Control Panel:
Heavy-duty, single push-button activation. Optional A. R. T. D. And interlocking with other dock equipment available for added safety.
8. Safety Legs:
Automatic 60, 000 lbs. (28tons)structural dock level support legs. Drop tested to the full rated capacity of the dock leveler.
9. Toe Guard Protection:
Full operating range toe guards with two galvanized sliding guards (yellow OSHA required markings) provided on the sides of the dock leveler.
10. Integral Support Strut & Lip Lock:
A permanently mounted support strut and lip lock are provided to support the lip and leveler during routine maintenance and pit cleaning.
11. Float Compensation:
Allows for vertical carrier deflection when lip is in contact with truck bed.
12. Bumpers:
Unit to include two heavy-duty dock bumpers model B300-250F, 10" x 12"(250mm x 300mm).

Materials
The deck is made of anti-slip checker plate and reinforced on the underside using steel profiles. The lip, which is also made of anti-slip checker plate, is connected to the deck across its full width by a pivot arrangement.

Finish
As standard, all fabricated steel components are blasted, primered and then painted in RAL 5010(blue).

More Product Features